586767
1
Zoom out
Zoom in
Previous page
1/2
Next page
Windshield
Quick Start Guide
Printed in China Part No. 480-911-P Version A
Cobra iRadar uses Bluetooth
®
wireless technology to
connect to your iOS or Android
device. Through this
connection, the Cobra iRadar app displays radar/laser alerts,
lets you customize detector settings, and provides access to
the iRadar Community.
Cobra iRadar is made for:
iPod touch (5th Generation, 4th Generation)
iPhone 5s, iPhone 5c, iPhone 5
iPhone 4s, iPhone 4
Android
®
smartphones running OS 2.1 or higher
Mounting iRadar
iRadar should be mounted on the windshield or dashboard
of your vehicle. 2 mounting options are included:
Suction Cup Mount
This is the best option for portability and moving the
detector from car to car. Make sure to thoroughly clean
the suction cups and windshield mounting area to insure
a tight seal.
Hook and Loop Fastener
Included for dashboard mounting.
Your detector should be
mounted so that it is oriented
parallel to the road.
The suction cup mount comes
standard bent at a 45° angle.
The metal is designed to bend
without breaking. Adjust the
angle so when mounted the
detector is level with the road.
Note: Do not attempt to bend
the mount while the detector
is attached.
Suction Cup Mount
Incorrect Positions
Correct Position
Model iRAD 230
Powering iRadar
NOTE: This device complies with part 15 of FCC rules: Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
This device must accept any interference received including interference that may
cause undesired operation.
CAUTION: Modifications or parts not approved by Cobra Electronics Corporation may
violate FCC Rules and void authority to operate this equipment.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils
radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes
: (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit
accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
Follow these simple steps to get your iRadar up
and running:
Plug in your Cobra iRadar detector unit
using the included cigarette lighter
adapter.
Note: the adapter includes a USB port
that can be used to charge your smart-
phone or tablet using the manufacturer’s
charging cable.
For more discreet installation, a
hardwire kit is available at
www.cobra.com, part number
RA-PSC B. This can be easily wired
into your fuse box so that iRadar
automatically turns on when your
car is running and does not require
professional installation.
Turn unit on. A red LED will light. Make sure the iOS/Android
toggle switch is switched to
the correct position. When switched
toward the white circle, your iRadar
will only communicate with iOS
devices. When switched toward the
green circle, your iRadar will only
communicate with Android devices.
iOS/Android Mode
Toggle Switch
Power/Volume Wheel
Hook & Loop Fastener
RA-PSC B
iRAD230_QSG.indd 1 10/17/13 4:34 PM
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cobra iRad 230 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cobra iRad 230 in the language / languages: English as an attachment in your email.

The manual is 0,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info