538617
3
Zoom out
Zoom in
Previous page
1/24
Next page
Section I Introduction
FREQUENCY RANGE
The COBRA 148GTL transceiver represents one of the most advanced SSB/AM
two-way radios ever designed for use as a Class D station in the Citizens Radio
Service. This unit features advanced Phase Lock Loop (PLL) circuitry, which is used
in the AM mode and in the upper and lower single sideband modes, providing
complete coverage of all 40 channels shown below.
Channel Channel Frequency
in MHz
1 26.965
2 26.975
3 26.985
4 27.005
5 27.015
6 27.025
7 27.035
8 27.055
9 27.065
10 27.075
11 27.085
12 27.105
13 27.115
14 27.125
15 27.135
16 27.155
17 27.165
18 27.175
19 27.185
Channel Channel Frequency
in MHz
21 27.215
22 27.225
23 27.255
24 27.235
25 27.245
26 27.265
27 27.275
28 27.285
29 27.295
30 27.305
31 27.315
32 27.325
33 27.335
34 27.345
35 27.355
36 27.365
37 27.375
38 27.385
39 27.395
40 27.405
20 27.205
The COBRA 148GTL has a vastly superior receiver which includes an RF gain
control and noise blanker circuitry effective in both AM and SSB modes., and an
automatic noise limiter effective in the AM mode. The receiver also features
increased protection against cross modulation and strong adjacent channel signals.
To obtain maximum performance please read carefully the descriptions and
operating instructions in this manual.
2
Section II Specifications
GENERAL
Channels 40 AM, 40 LSB, 40 USB.
Frequency Range 26.965 to 27.405 MHz.
Frequency Control Phase Lock Loop (PLL) synthesizer.
Frequency Tolerance 0.005%.
Frequency Stability 0.001%.
Operating Temperature Range -22° F to +122° F (-30° C to +50° C).
Microphone Plug-in dynamic; with push-to-talk switch and
coiled cord.
Input Voltage 13.8V DC nominal, 15.9V max., 11.7V min.
(positive or negative ground).
Current Drain Transmit: AM full mod., 2.2A. SSB 12 watts PEP
output, 2A.
Receive: Squelched, 0.25A Maximum audio
output, 0.6A.
Size 2
3
/
8
”(H) x 7
7
/
8
”(W) x 9
1
/
4
”(D).
(6 cm (H) x 20 cm (W) x 23.5 cm (D)).
Weight 5 lbs. (2.27 kg).
Antenna Conductor UHF, S0239.
Semiconductors 3 field effect transistors, 45 transistors, 63 diodes,
6 integrated circuits, 1 two color light emitting
diode.
Meter (3-in-1) Illuminated; indicates relative output power,
received signal strength, and SWR.
TRANSMITTER
Power Output AM, 4 watts. SSB, 12 watts, PEP.
Modulation High-and low-level Class B, Amplitude
Modulation.
Intermodulation Distortion SSB: 3rd order, more than -25 dB. 5th order,
more than -35 dB.
SSB Carrier Suppression 55 dB.
Unwanted Sideband 50 dB.
Frequency Response AM and SSB; 300 to 2500 Hz.
Output Impedance 50 ohms, unbalanced.
Output Indicators Meter shows relative RF output power and SWR.
Transmit LED glows red when transmitter is in
operation.
3
3


Need help? Post your question in this forum.

Forumrules
1

Forum

cobra-148-gtl

Reset search

  • Y would like to now how to adjust the S meter on the cobra 148 GTL please? Submitted on 30-4-2022 at 23:50

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cobra 148 GTL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cobra 148 GTL in the language / languages: English, Spanish as an attachment in your email.

The manual is 0,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info