4
Count the number of flashes for
each code number.
For example, for the code 306, the key
flashes three, zero and six times to
give:
= 3
= 0
= 6
4. Note this code on the label
inside the battery cover
for rapid consultation.
NOTING THE PROGRAMMED CODE
To find the code for your remote control:
1. Hold down the SHIFT and ON/OFF
keys together until the light indicator at
the top starts to flash.
2. Release the SHIFT and ON/OFF keys
and then press and release the 1-/--
key.
3. After a few seconds, the light
indicator communicates the
code you are looking for by flashing
the three numbers separately.
USING THE ADDITIONAL COMMANDS WHICH DO NOT
APPEAR ON THE KEYPAD
Although not indicated on the keypad, some keys can be used for additional commands.
1.
Use your TOPTEL TV remote control to find them by pressing the following keys one by one:
2. The most frequently used additional commands like MENU SCROLL – COLOUR -
BRIGHTNESS and NORMALISATION are located as follows:
normalisation
OK
1-/--
Always write down the 3-digit code for your remote control on the label inside the
battery cover after running the search and saving the code. This may be useful if you
need to reprogram your remote control in the event of accidental cancellation or when
you change used batteries. If you forget to write down the code or use the remote
control programming procedures A or C ... don’t worry!
menu (up) +
menu (down) +
menu (right) +
menu (left) +
menu (up)
menu (down)
menu (right)
menu (left)
brightness (-) red
brightness (+) green
color (-) yellow
color (+) blue
brightness (-) + red
brightness (+) + green
color (-) + yellow
color (+) + blue
1-/--
2-
MENU
OK AV
