497773
2
Zoom out
Zoom in
Previous page
1/5
Next page
7
INSERTING THE BATTERIES
Before using the remote control, insert the batteries and programme it.
Do not leave at batteries inserted, as liquid may leak and damage the remote control
The Control 2 Digital remote control is a universal remote with a memory containing data regarding numerous devices
produced by different brands on the market.
Each original device has a speci c code which must be used to set up the remote control.
So to use the Control 2 Digital you must enter the speci c code for each device you wish to control.
So use one of the following methods to identify the correct code and set it in your remote control:
A) - INTERNET (recommended)
B) - CELL PHONE (SMS)
C) - MANUAL SEARCH
SETTING CODES
If you have an Internet connection available, follow the on-line guide on the www.cme.it website to identify the speci c
codes for the devices you wish to command. Then set the codes manually in your CME remote control as described in the
ENTERING THE CODE DIRECTLY procedure.
SETTING CODES USING INTERNET
Today, CME gives customers who don’t have internet the chance to receive the codes for programming their remote
control directly on their cell phone.
Simply send an SMS to this number 0039 345 7518893 as follows:
2D, Type, Brand, Model
- [Type] = to indicate the device to be controlled using one of the following abbreviations: TV - SAT - TER (terrestrial
decoder).
- [Brand, Model] = to indicate the brand and the model of the device to be controlled.
Example: 2D, TV, PHILIPS, 32PFL3614 (if you don’t know the model, don’t write anything after the brand).
Once you have received the SMS with the list of codes, set the rst code in the remote control as described in the
ENTERING THE CODE DIRECTLY section.
SETTING CODES USING A CELL PHONE
(the service is free and the only cost is that of sending the SMS, which naturally depends on the rates of the service
operator in question)
The remote control requires 2 new 1.5V alkaline AAA/LR03 batteries.
Insert them as illustrated.
Try pressing a number button and check that the red light remains lit continuously
until you release the button. If the light ashes, the batteries inserted are not charged
and are about to go at, therefore you must substitute them.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cme CONTROL 2 Digital at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cme CONTROL 2 Digital in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info