Manual Cleanmaxx Z 02770 - JJ-SC-005B (page 25 of 60) (English, German, Dutch, French)

562278

Zoom out

Zoom in

1/60

4. Turn the knob for the steam quantity control (8) to the minimum

setting by turning it counterclockwise until it comes to a stop.

5. Park the appliance in an upright position. The hinge of the clean-

ing head locks in when in an upright position.

6. Insert the mains plug in a properly installed socket that is easily accessible. The power

LEDs (12) behind the water tank will illuminate in red as soon as operating voltage is present.

Wait until the appliance has reached the operating temperature and the power LEDs are blue.

7. Push the

steam On/Off switch (4) on the front of the main unit. (The steam activating switch

on the back (13) has been deactivated when the handle bar is inserted.) Steam will begin to

be emitted from the cleaning head. You can now increase the quantity of steam by turning

the knob for the steam quantity control. NOTE: After the knob is turned, it will take a few

seconds until the respective steam quantity is reached.

8. Hold the appliance by the handle and tip it slightly towards the ﬂ oor in order to release it

from the upright locking position.

9. Slowly slide the cleaning head back and forth over the ﬂ oor. The ﬂ oor will be cleaned in the

process.

10. When you have ﬁ nished cleaning the ﬂ oor, push the steam On/Off switch and pull the mains

plug out of the socket. Never pull on the cord, but always on the plug.

11. Wait a few minutes for the appliance to cool off before you remove the ﬂ oor pad. Be aware

that when turning off the appliance a wet area can form beneath the cleaning head.

12. Follow the instructions in the section “After use”.

Use as a handheld steam cleaner

1. Take the handle bar and cleaning head off of the main unit and mount the nozzle adapter with

the desired nozzle on it (see chapter “Assembling the appliance” and “Appliance functions

(Nozzle functions)”).

2. Fill the water tank (see chapter “Filling the water tank”).

3. Turn the knob for the steam quantity control (8) to the mini-

mum setting by turning it counterclockwise until it comes to a

stop.

4. Insert the mains plug in a properly installed socket that is easi-

ly accessible. The power LEDs (12) behind the water tank will

illuminate in red as soon as operating voltage is present. Wait

until the appliance has reached the operating temperature and

the power LEDs are blue.

5. Push the

steam On/Off switch (4) on the front of the main unit. In order to emit steam, Push

the steam acivating switch (13) on the back of the main unit. Release the steam activating

switch to stop emitting steam. You can now increase the quantity of steam by turning the

knob for the steam quantity control. Note: After the knob is turned, it will take a few se-

conds until the respective steam quantity is reached.

6. Slowly let the nozzle glide over the surface to be cleaned.

7. When you have ﬁ nished cleaning, push the steam On/Off switch and pull the mains plug out

of the socket. Never pull on the cord, but always on the plug.

8. Wait a few minutes for the appliance to cool off. Afterwards, you can change the nozzle.

9. Follow the instructions in the section “After use”.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cleanmaxx Z 02770 - JJ-SC-005B in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,93 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cleanmaxx Z 02770 - JJ-SC-005B Manual

Product: