562007
21
Zoom out
Zoom in
Previous page
1/48
Next page
21
2. Completely unwind the mains cord from the hook (3), insert it in the cord bracket (2) and
connect it with an easily accessible socket whose mains voltage corresponds to the device’s
technical data.
3. Press down the unlocking pedal (8) and set the handle (14) to
a comfortable position.
4. Using your foot, press the on / off switch
(7) to switch on
the device.
5. Run the device to a corner of the carpet.
6. Push the device forward along the carpet border and depress the button for emitting the
cleaning solution (1). This will apply and brush the cleaning solution into the carpet. In the
process, walk next to the device. Do not step on the wet carpet! Once you have arrived
at the other end of the carpet, release the button.
7. Now go over the same strip in reverse. The dirty water will be vacuumed up.
8. Start the next strip slightly overlapping the cleaned carpet strip. Work with even forward
and backward movements up to the other edge of the carpet. In the event of stubborn dirt,
go over a strip of the carpet several times if necessary.
9. When the dirty water reservoir (11) is lled to the Max marking, it must be emptied (see
the “After Use” chapter, “Cleaning the Device” section). If you would like to empty the dirty
water reservoir, ll up the fresh water reservoir, or nish cleaning, switch off the device
by pressing the on / off switch
, lay it on the prepared cloth, and bring the handle to the
upright position.
10. Remove the mains plug from the mains socket.
After Use
1. Let the freshly cleaned carpet dry completely.
2. Do not step on it as long as it is still wet. If this cannot be avoided, lay out white or colour-
fast cloths and step on them.
3. If the cleaning solution ends up on wood oors or furniture, wipe it up.
4. Vacuum clean the dry carpet with a vacuum cleaner. Use a brush adapter for this (if possible).
5. After use, the water reservoirs have to be emptied and rinsed out (see the “Cleaning the
Device” section). Do not store or transport the device when liquid is still in the reservoirs.
Cleaning the Device
CAUTION!
Prior to each cleaning, pull the plug out of the socket.
The lters may not be cleaned in the washing machine.
Only air dry the lters and do not in any case use a hair dryer.
When cleaning the housing, do not use any chemical cleaners. They could damage the device.
1. Make sure that the mains plug is pulled out.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cleanmaxx Z 01097 - VC-9387S-7 Carpet Cleaner at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cleanmaxx Z 01097 - VC-9387S-7 Carpet Cleaner in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info