562002
15
Zoom out
Zoom in
Previous page
1/44
Next page
15
centre/quali ed professional for your own safety. This also applies to the power cord.
In the event of damage, contact the customer service.
Do not use the device if the cord or plug is damaged or if the device is otherwise dam-
aged.
In the event of damages/malfunctions, immediately disconnect the device from the
electrical line.
Only connect the device to an electrical socket which has been properly installed and
complies with the data on the speci cation plate of the device. The socket must also
be easily accessible after the device has been connected.
Never carry or pull the device by the power cord, always handle the power cord with
care. Avoid catching the cord on doors and pulling it across sharp edges or corners.
Keep the cord away from hot surfaces.
The device must be off when you pull out the mains plug or connect it with a socket.
In the event of a storm, pull the mains plug out of the socket.
If you wish to pull the mains plug out of the socket, never pull on the cord, but always
on the plug.
Do not use any extension cords.
Never immerse the device in water or other liquids. Otherwise there is a risk of
electrical shocks.
Do not touch the device with wet hands. Do not use the device outdoors or in rooms
with high humidity.
Only use the device in dry, indoor spaces.
Caution when using the device
For your own safety, always check the device for damages prior to using it. In
the event of defects, the device may not be used until repaired by a professional.
If the mains cord is damaged, it must be replaced at a quali ed workshop to avoid risks.
Only use the device if it has been properly assembled and the mains cord has been
completely unwound. The tanks for fresh and dirty water and both lters (exhaust lter
and protective motor lter) must be installed.
Always make sure that there is no risk of the device tipping over. The water could leak
out of the water tanks.
Connected cords must not pose a tripping hazard.
Make sure that there is no risk of the device rolling over the mains cord.
Do not insert anything in the device’s openings and make sure that they are not blocked
so that air circulation is not impaired.
Do not use any sharp or pointed objects to remove debris from the device. They could
damage the device.
Never leave the device unattended while switched on.
Turn the device off and pull the mains plug if you stop cleaning and after you nish
using the device.
Place the device on a cloth after use so that any water left in the nozzles can drain out
when the device is off.
The lters must be completely dry after washing before you put them back in the device.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cleanmaxx Z 01037 - VC9388 Carpet Cleaner at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cleanmaxx Z 01037 - VC9388 Carpet Cleaner in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 6,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info