Manual Cleanmaxx Z 01029 - VC9388 Carpet Cleaner (page 19 of 44) (English, German, Dutch, French)

562004

Zoom out

Zoom in

1/44

Cleaning the carpet

❐ Do not use the device as a conventional vacuum cleaner.

❐ Always make sure that there is no risk of the device tipping over. The

water could leak out of the water tanks. To stow the device, position the

handle in an upright position so that it locks into place.

❐ Never leave the device on when unattended.

❐ Turn off the device before you remove a water tank.

❐ Do not excessively wet the carpet.

1. Determine where you want to start and stop cleaning without stepping on the area of the

carpet that was just cleaned. We recommend that right-handed persons start on the right

carpet border and left handed persons start on the left carpet border.

Cleaning solution may leak out of device once it is deactivated. For this reason, have a cloth

laid out that you can place the device on after use.

2. Completely unwind the mains cord from the hook (10), insert it in the cord bracket (14) and

connect it with an easily accessible socket whose mains voltage corresponds to the device’s

technical data.

3. Push the On/Off switch (13) to the I position to turn on the device.

4. Step on the pedal (12) and tilt the handle to a position that is

comfortable for you.

5. Run the device to a corner of the carpet.

6. Push the device forward along the carpet border and depress

the button for emitting the cleaning solution (9). This will apply

and brush the cleaning solution into the carpet. In the process,

walk next to the device. Do not step on the wet carpet!

Once you have arrived at the other end of the carpet, release

the button.

7. Now go over the same strip in reverse. The dirty water will be vacuumed up.

8. Start the next strip slightly overlapping the cleaned carpet strip. Work with even forward and

backward movements up to the other edge of the carpet. In the event of stubborn dirt, go

over a strip of the carpet several times if necessary.

9. Once the dirty water tank (7) ﬁ lls up to the Max mark, it will have to be emptied (see chap-

ter “After use”, section “Cleaning the device”).

10. If you would like to empty the dirty water tank, ﬁ ll the fresh water tank or end the cleaning

process, place the device on the cloth you laid out. Turn it off (switch set to 0) and bring the

handle to an upright position.

11. Remove the power plug from the socket.

l'eau ne coule pas du réservoir d'eau fraiche vers le bas Pourquoi Submitted on 28-9-2021 at 09:41
Reply Report abuse
L'eau ne coule pas du réservoir d'eau fraiche Pourquoi? Submitted on 28-9-2021 at 09:39
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cleanmaxx Z 01029 - VC9388 Carpet Cleaner in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 6,84 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cleanmaxx Z 01029 - VC9388 Carpet Cleaner Manual

Product: