562004
14
Zoom out
Zoom in
Previous page
1/44
Next page
14
Only connect the device to an electrical socket, which has been properly installed
and complies with the data on the speci cation plate of the device. The socket
must also be easily accessible after the device has been connected.
The device must be off when you pull out the mains plug or connect it with a
socket.
In the event of a storm, pull the mains plug out of the socket.
If you wish to pull the mains plug out of the socket, never pull on the cable, but
always on the plug. Only take hold of the mains plug when your hands are dry.
Do not use any extension cords.
Caution when using the device
The lters must be completely dry after washing before you put them back in the
device.
Only use the device if it has been properly assembled and the mains cord has been
completely unwound. The tanks for fresh and dirty water and both lters (exhaust
lter and protective motor lter) must be installed.
For your own safety, always check the device for damages prior to using it. In the
event of defects, the device may not be used until repaired by a professional.
If the mains cord is damaged, it must be replaced at a quali ed workshop to avoid
risks.
Always make sure that there is no risk of the device tipping over. The water could
leak out of the water tanks.
Connected cords may not pose a tripping hazard.
Make sure that there is no risk of the device rolling over the mains cord.
Do not insert anything in the device’s openings and make sure that they are not
plugged so that air circulation is not impaired.
Never leave the device on when unattended.
Turn the device off and pull the mains plug if you stop work and after you nish
using the device.
Always turn off the device before you pull out the mains plug.
Place the device on a cloth after use so that water left in the nozzles can drain
when the device is off.
Caution in the event of malfunctions
Do not insert any objects into the device. There is a risk of contact with current-
carrying parts.
Do not use any sharp or pointy objects to remove debris from the device. They
could damage the device.
Damage to property and the device
Never place heavy objects on the device.
Protect the device against heat, open ames, direct sunlight, and percussions. Make
sure there is no risk of the device falling down.
Only use original spare parts provided by the manufacturer.
Only ll the fresh water tank with commercially-available carpet cleaners for carpet
washers.
14


Need help? Post your question in this forum.

Forumrules
1

Forum

cleanmaxx-z-01029---vc9388-carpet-cleaner

Reset search

  • l'eau ne coule pas du réservoir d'eau fraiche vers le bas Pourquoi Submitted on 28-9-2021 at 09:41

    Reply Report abuse
  • L'eau ne coule pas du réservoir d'eau fraiche Pourquoi? Submitted on 28-9-2021 at 09:39

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cleanmaxx Z 01029 - VC9388 Carpet Cleaner at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cleanmaxx Z 01029 - VC9388 Carpet Cleaner in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 6,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info