553269
4
Zoom out
Zoom in
Previous page
1/6
Next page
4
1. Normal position (wearing position): when the crown is positioned against the case, the crown ensures that
the watch is water-resistant.
Occasional winding: if the watch has not been worn for more than 42 hours or more, wind it up with the crown in
position 1.
2. Correcting the date: pull the crown out to position 2, turn the crown backwards (forwards for references 83)
and push it back to position 1.
Correcting the day: for the references 83: pull the crown out to position 2, turn the crown backwards, then push
the crown to position 1.
3. Time setting: hours, minutes and seconds. Pull the crown out to position 3. The seconds hand will stop. Turn
the crown forwards or backwards. Synchronise the seconds by pushing the crown back to position 1 to coincide
with a given time signal.
Power reserve: for references 94: The small hand places in the counter at 6 o’clock indicates the power reserve.
If the automatic mechanical watch is not worn, the power reserve lasts for approximate 42 hours. The power
reserve can be increased by winding up the crown manually in position 1 or while wearing the watch on the wrist
by the rotation of the oscillation mass.
Claude Bernard 85
Watch functions:
The crown has 2 positions:
1. Normal position (wearing position): when the crown is positioned against the case, the crown ensures that
the watch is water-resistant.
Occasional winding: if the watch has not been worn for more than 42 hours or more, wind it up with the crown in
position 1.
2. Time setting: hours, minutes and seconds. Pull the crown out to position 3. The seconds hand will stop. Turn
the crown forwards or backwards. Synchronise the seconds by pushing the crown back to position 1 to coincide
with a given time signal.
Quartz Watches
Claude Bernard 010, 015
Watch functions:
The crown has 3 positions:
1. Normal position (wearing position): when the crown is positioned against the case, the crown ensures that
the watch is water-resistant.
2. Correcting the date: pull the crown out to position 2, turn the crown backwards and push it back to position 1.
3. Time setting: hours, minutes and seconds. Pull the crown out to position 3. The seconds hand will stop. Turn
the crown forwards or backwards. Synchronise the seconds by pushing the crown back to position 1 to coincide
with a given time signal.
Chronograph functions:
Pusher A: start – stop, start – stop, etc.
Timing to 1 second for up to 60 minutes.
Pushers B: reset (after a stop)
Split Time function:
Pusher A: start
Pusher B: stop to read the split time.
The chronograph continues to operate.
Pusher B: restart
The chronograph hands catch up with the elapsed time.
Pusher A: for the last stop and to display the total time.
Pusher B: reset.
NB: the hands should be reset to their original position before the chronograph is used:
Resetting of the 60 minutes hand to zero: crown in position 2 and pusher B.
Resetting of the 30 seconds hand to zero: crown in position 3 and pusher A.
Resetting of the 5 minutes hand to zero: crown in position 3 and pusher B.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Claude Bernard CB 01002 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Claude Bernard CB 01002 in the language / languages: English as an attachment in your email.

The manual is 0,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Claude Bernard CB 01002

Claude Bernard CB 01002 User Manual - Dutch - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info