551783
41
Zoom out
Zoom in
Previous page
1/65
Next page
Remove the power plug from the socket.
Release the pressure by using the steam switch (5).
If the device is still warm, please wait 5 minutes before removing the
seal completely. Press the seal downwards and turn.
Caution! Danger of Injury!
Please open the safety lock (4) only when no more steam comes
out of the nozzle.
Shake any residual water out of the kettle (2). Then
fill the measuring beaker (9) and pour the water into the kettle. Use a
funnel (8) if necessary. Re-fasten the safety lock (4).
Attachment of the Individual Accessories
It is possible to attach the individual nozzles directly to the connecting head of the
hose (3):
Attach one of the nozzles to the connecting head of the hose until it locks in
place.
In order to release the nozzle again please press the button on the connecting
head of the hose.
Keep the button pressed down and then pull the nozzle off.
or extend the nozzle attachments with one or two extension tubes (10).
Insert one extension tube into the other until it locks in place and then insert the
connected tubes into the handle section (3).
Then attach the floor brush nozzle (12) or the accessories.
In order to release the extension tube, please press the button on the connec-
ting head.
Jet nozzle with round
brush attachment (11):
For cleaning joints, the edges of bath tubs or areas
which are difficult to access etc.
Floor brush nozzle (12): For large surfaces, such as laminate or tiles etc.
Window wiper (13): For window cleaning, shower partitions etc.
Non-woven cover (14): Non-woven cover for sensitive surfaces. Please use the
cover together with the window wiper.
Switching on the Device
Before inserting the mains lead into the socket, check whether the voltage you
intend to use complies with that of the machine. For details see the machine
label.
Only connect the machine to a properly installed safety socket, 230 V/50 Hz.
Turn the on/off switch (1) on top of the device to "I".
41
GB
5....-05-DR 2812 19.09.2003 11:32 Uhr Seite 41
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clatronic DR 2812 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic DR 2812 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish, Norwegian as an attachment in your email.

The manual is 1,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info