63042
6
Zoom out
Zoom in
Previous page
1/120
Next page
6
3. EINBAU
Alle Leitungen provisorisch anschließen und überprüfen, ob die Verbindungen korrekt sind und ob das
Gerät und das System wie gewünscht funktionieren, bevor der endgültige Einbau erfolgt.
Nur die Teile verwenden, die im Lieferumfang des Geräts enthalten sind, um einen korrekten Einbau
zu gewährleisten. Der Einsatz von unautorisierten Teilen kann zu Störungen führen.
Falls das Bohren von Löchern oder sonstige Modifikationen am Fahrzeug erforderlich sind, sollte der
lokale Händler kontaktiert werden.
Die Einheit muss so eingebaut werden, dass der Fahrer nicht behindert wird und dass im Fall eines
plötzlichen Anhaltens, zum Beispiel in einer Notsituation, der Beifahrer nicht verletzt werden kann.
Falls der Einbauwinkel mehr als 30° von der Horizontalen abweicht, ist es möglich, dass das Gerät
nicht die optimale Leistung erbringt.
Das Gerät darf nicht an Orten eingebaut werden, an denen hohe Temperaturen auftreten, etwa durch
direktes Sonnenlicht oder Warmluft vom Gebläse, und auch nicht an Orten, an denen es Staub,
Schmutz oder übermäßiger Vibration ausgesetzt wäre.
Sicherstellen, dass die Frontblende vor dem Einbau des Geräts abgenommen wurde.
DIN-EINBAU VON VORNE / VON HINTEN
Dieses Gerät kann ohne Probleme "von vorne" (konventioneller DIN-Einbau von vorne) oder "von hinten"
(DIN-Einbau von hinten durch Nutzung der Gewindebohrungen an den Seiten des Gerätegehäuses) einge-
baut werden. Nähere Informationen finden Sie im Folgenden in den Beschreibungen der Methoden A und B.
DIN-EINBAU VON VORNE (Methode A)
Einbau des Geräts
1. Armaturenbrett
2. Halterung
Führen Sie die Halbhülse in das Armaturenbrett ein.
Wählen Sie dann die geeignete Lasche, je nach Dicke
des Materials des Armaturenbretts, und biegen Sie sie
nach innen, um die Halterung zu arretieren.
3. Schraube
1) Armaturenbrett
2) Mutter (5mm)
3) Federscheibe
4) Schraube (4X12mm)
5) Schraube
6) Haltestreifen
Der Haltestreifen muss unbedingt eingesetzt werden,
um die Rückseite des Geräts zu befestigen. Der Strei-
fen kann von Hand bis zum gewünschten Winkel ge-
bogen werden.
7) Scheibe
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clatronic AR 760 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic AR 760 in the language / languages: English, German as an attachment in your email.

The manual is 10,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info