497716
28
Zoom out
Zoom in
Previous page
1/29
Next page
55
Deutsch
54
System voll DVB kompatibel
Satelliten Tuner Anschlüsse F-Buchse
Eingang Frequenzbereich 950MHz ~ 2150MHz
Eingangssignalpegel -65dBm ~ -25dBm
LNB Spannungsvers DC 13/18V, max 400mA
LNB Umschaltung 22 KHz
DiSEqC Ver 1.0/1.1/1.2/USALS Kompatibel
Demodulator Front End DVB-S/S2 QPSK, 8PSK
Symbolrate DVB-S : 2~45Msps
DVB-S2 : 10~30Msps(QPSK) 10~30Msps(8PSK)
SCPC und MCPC
Spectral inversion Auto Umsetzung
Systemdaten Hauptprozessor 32bit Prozessor (450MHz)
DDR SD RAM 64Mbyte X 2
Flash Rom 8Mbyte
EEPROM 256Kbit
Video Decoder MPEG 2 MPEG-2, MPEG-4, H.264
Datenrate bis zu 15M bits/s
Auflösung 720 x 576P/i, 1280 x 720P, 1920 x 1080i/P
Videoformat PAL
Seitenverhältniss 4:3, 16:9
Videotext DVB Konform
MPEG Audio MPEG 1 layer I/II,
MPEG 2 layer II,
AC3 Dolby Digital
Typ Mono, Stereo, Joint Stereo
Samplingrate 32, 44.1 und 48 KHz
Infrarot Code NEC-IR
Fernbedienung Reichweite bis zu 7 m
7.2 Technische Daten
mögliche Ursache
Der Netzstecker ist nicht
eingesteckt
Der Video/ Audio Anschluss zum
Fernseher ist nicht korrekt
verbunden Das Satkabel ist nicht
korrekt angeschlossen.
Die Antenne ist nicht richtig auf
einen Satelliten ausgerichtet.
Kein oder schlechtes Signal .
Falsche Kanaleinstellungen.
Der Ausgangsmodus ist falsch
eingestellt (PAL/NTSC)
Die Batterien sind leer Fremde
Lichtquellen interferrieren mit
Ihrem Infrarotsensor
Die Fernbedienung zeigt in die
falsche Richtung
Fehlerbehebung
Stecken Sie das Netzkabel in
eine Steckdose
Verbinden Sie die
Audio/Videokabel korrekt mit
dem Fernseher.
Schlieen Sie das Satkabel
korrekt mit dem Receiver.
Richten Sie die Antenne aus.
Prüfen Sie die Anschlüsse am LNB
und allen Komponenten bis zum
Receiver oder richten Sie die
Antenne aus.
Ändern Sie die
Kanaleinstellungen.
Benutzen Sie den Modus den Ihr
TV unterstützt Benutzen Sie ggf.
einen Konverter zu PAL/NTSC
Wechseln Sie die Batterien
Beseitigen Sie die Lichtquelle
Richten Sie die Fernbedienung in
Richtung Ihre Gerätes
Problem
Die LED an der
Gerätefront leuchtet
nicht
Kein Bild und kein
Ton
Schwarzwei
bild
Die Fernbedienung
arbeitet nicht
Technische Spezifikation
Es kann viele Ursachen haben wenn Ihr Receiver sich nicht wie gewohnt verhält oder
bedienen lässt. Wir haben Ihnen einige Prozeduren für häufige Fehler zusammengestellt.
7.1 Fehlerbeseitigung
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clarke-tech HD3100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clarke-tech HD3100 in the language / languages: German as an attachment in your email.

The manual is 6,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Clarke-tech HD3100

Clarke-tech HD3100 User Manual - English - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info