455896
16
Zoom out
Zoom in
Previous page
1/20
Next page
15
Once enter the SETUP mode you can browse the items by turning FOLDER knob, and pressing FOLDER
knob to on or off item selection, see more details of the different submenus and options as below:
)
TIME MODE: You can select different time display by pressing the FOLDER knob to switch between
elapsed and remaining.
The default setting is REMAIN TIME
)
PLAY MODE: This function allows you to choose single-track play or continuous track play (all tracks in order).
The default setting is CONTINUOUS play.
)
AUTO CUE: This will indicate if the Auto Cue is on or off.
The default setting is AUTO CUE.
)
REPEAT: OFF –All the tracks in the music source device will play in the normal mode.
REPEAT: ON –The tracks within one folder are playback.
The default setting is REPEAT OFF.
)
RELAY: Press the FOLDER knob to switch the RELAY on and off.
RELAY: OFF –The left and right players will automatically be in the continuous play mode.
RELAY: ON –The left and right players will automatically be in the single play mode.
The default setting is RELAY OFF.
)
CROSSFADER ACTIVE: Only available when MIXER OUTPUT is ON. Press the FOLDER knob to switch
the CROSSFADER on and off. This fader is used to mix the output signals of the left and right players.
CROSSFADER: OFF –The output signals of both players will be even.
CROSSFADER: ON –The mix signals from the left and right players according to the crossfader position.
The default setting is CROSSFADER ON.
)
Reset all: In the “Reset all?” section, this will reset all your programmed menus and restore the unit to its
default settings. Press the FOLDER knob will return all function setting to default setting automatically and
then "reset OK" will display in the LCD.
FIRMWARE VERSION
You may display the unit firmware version Firmware is the unit internal
programming code. Once enter setup mode and then turn the FOLDER
KNOB until Vxx.xx is displayed. “x’s” are the version number.
S
Y
S
TEM
S
ETTIN
G
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Citronic MPSD-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Citronic MPSD-2 in the language / languages: English as an attachment in your email.

The manual is 2,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info