668069
3
Zoom out
Zoom in
Previous page
1/4
Next page
F900 User’s guide
Continued on the next page
Using alarm
The alarm on this watch always works based on the home time.
1.
Change the mode to [ALM] and pull the crown out to
position
2
.
The dual time indication indicates the current alarm time setting and the
second hand shows the current alarm setting (
ALM ON/OFF
).
The hour and minute hands may automatically move to provide a clear
view of the alarm time setting.
2.
Rotate the crown to set the alarm time.
If you rotate the crown quickly a few times, the hand will move
continuously. To stop the rapid movement, rotate the crown in either
direction.
3.
Press and release the lower right button
A
to set the alarm
setting (ALM ON/OFF).
Each time you press button, the setting changes alternately.
4.
Change the mode to [TME] and push the crown in to position
0
to finish the procedure.
The second hand returns to indicate the seconds.
To stop alarm
Press any button.
Checking and adjusting leap second setting
The leap second setting can be adjusted by executing leap second reception.
You can find a list of leap seconds at the homepage of IERS
(INTERNATIONAL EARTH ROTATION & REFERENCE SYSTEMS
SERVICE).
http://hpiers.obspm.fr/eop-pc/earthor/utc/TAI-UTC_tab.html
1.
Change the mode to [SET] and pull the crown out to position
2
.
The second hand points to 0 second and stops.
2.
Press and hold upper right button
B
for 2 seconds or more.
Using the “0:00:00” position as the starting point, the minute and second
hands indicate the leap second setting.
When the leap second setting is
“−36 seconds”
When the leap second setting is
“−65 seconds”
The hands point to “0 minute
36 seconds.
The hands point to “1 minute
5 seconds.
3.
Turn the crown to adjust the setting if the leap second is not
correct.
Adjustable range is from 0 to ‒90 seconds.
4.
Change the mode to [TME] and push the crown in to position
0
to finish the procedure.
The second hand returns to indicate the seconds.
Indicating summer time
1.
Change the mode to [
TME
] or [
LLI
] and pull the crown out
to position
2
.
The function hand indicates summer time setting of the home time (
SMT
ON/OFF
).
When the mode is [UTC], you can only change summer time setting of
the home time.
2.
Press and release the lower right button
A
.
SMT ON
Summer time is indicated.
SMT OFF
The standard time is indicated.
Each time you press button
A
,
SMT ON
and
OFF
changes alternately.
3.
Press and release the upper right button
B
.
The function hand indicates summer time setting of the local time (
SMT
ON/OFF
).
Each time you press button
B
, the minute hand of setting target
slightly moves and the target (home time/local time) of time zone
setting changes alternately.
4.
Press and release the lower right button
A
to change
summer time setting of the local time.
5.
Push the crown in to position
0
to finish the procedure.
The second hand returns to indicate the seconds.
Using the chronograph
The watch can measure up to 23:59’59.95” by 1/20 seconds.
1.
Change the mode to [CHR] and push the crown in to position
0
.
0.00 second is indicated.
2.
Start measurement.
Start/stop: press button
B
.
1/20 chronograph seconds are indicated by the function hand only
when the chronograph is stopped.
Reset: press button
A
while the chronograph is stopped.
After measurement
Reset the chronograph and change the mode to [
TME
].
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Citizen CC9015-54 - Cal F900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Citizen CC9015-54 - Cal F900 in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Citizen CC9015-54 - Cal F900

Citizen CC9015-54 - Cal F900 User Manual - English - 116 pages

Citizen CC9015-54 - Cal F900 User Manual - Dutch - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info