622965
4
Zoom out
Zoom in
Previous page
1/4
Next page
You can see the leap year table in our web page:
http://citizen.jp/cs/guide/leapyear/index.html
5.
Repeat steps 3 and 4.
6.
Push the crown in to position
0
in accordance with a
reliable time source.
The second hand starts moving from 0 second.
7.
Change the mode to [TME] to finish the procedure.
Checking the reference position
1.
Change the mode to [
CHR
] and pull the crown out to
position
2
.
The second and function hands and dual time indication point to 0
position and stop.
2.
Press and hold the lower right button
A
.
The hands and date start to move to the current reference positions
stored in memory.
Release the button as the hands start to move.
3.
Checking the reference position
Hour, minute and second hands: 0 hour 00
minute 0 second
Date indication: midway between “31” and “1”
Function hand: “.0” (just upright)
Dual time indication: 0 hour 00 minute
When the reference position is not correct,
proceed to step 3 of Correcting the reference
position (next section).
Adjusting the time and calendar manually
You can set the time and calendar of the home time manually.
Execute world time setting following Setting the world time manually
beforehand.
The time of the local time is corrected automatically following its time zone
setting after setting the home time manually.
1.
Change the mode to [SET] and pull the crown out to position
2
.
The second hand points to 0 second and stops.
2.
Press and hold the lower right button
A
for 2 seconds or
more.
The minute hand slightly moves and time and calendar become
adjustable.
3.
Press and release the lower right button
A
repeatedly to
change the hand/indication to be corrected.
Each time you press button
A
, the target changes as follows.
Hour and minute → date → year/month → day of week → (back to the
top)
The hands and indications slightly moves when selected to show they
become adjustable.
4.
Rotate the crown to adjust the hand/indication.
Hour, minute and date move synchronously. Take care the time set is
AM or PM. Change of date indication shows it just became AM.
Date indication changes to the next as the function hand rotates 5
times.
When you rotate the crown quickly a few times, the hand/indication
will move continuously. To stop the rapid movement, rotate the crown
in either direction.
Year and month are indicated with the second hand.
F900 User’s guide
4.
Push the crown in to position
0
.
5.
Change the mode to [TME] to finish the procedure.
Correcting the reference position
1.
Change the mode to [
CHR
] and pull the crown out to
position
2
.
The second and function hands and dual time indication point to 0
position and stop.
2.
Press and hold the lower right button
A
.
The hands and date start to move to the current reference positions
stored in memory.
Release the button as the hands start to move.
3.
Press and release the lower right button
A
.
The function hand slightly moves and the hand and date indication
become adjustable.
4.
Press and release the lower right button
A
repeatedly to
change the hand/indication to be corrected.
Each time you press the button, the target changes as follows.
Function hand/date indicationDual time indication
Hour and minute handsSecond hand → (Back to the top)
The hands slightly moves when selected to show they become
adjustable.
5.
Rotate the crown to adjust the hand/indication.
When you rotate the crown quickly a few times, the hand/indication
will move continuously. To stop the rapid movement, rotate the crown
in either direction.
6.
Repeat steps 4 and 5.
7.
Push the crown in to position
0
.
8.
Change the mode to [TME] to finish the procedure.
Resetting the watch — All Reset
1.
Change the mode to [CHR] and pull the crown out to
position
2
.
2.
Press and hold buttons
A
and
B
at the same time for 4
seconds or more and release them.
Alarm sounds as the buttons are released and the hands move to their
current reference position.
The setting values after All Reset
Calendar
January of leap year (5-second position)
World time
Time zone (offset) 0 (LON), London
Reception result
NO
Summer time
SMT OFF at all time zones
Alarm setting
ALM OFF
Alarm time
0:00AM
Leap seconds
No change after All Reset
Rollover number
After All Reset
After All Reset, adjust the reference position, set the time and calendar and
execute alarm setting.
N
O
O
K
R
X
G
P
S
R
X
T
M
E
M
L
A
F
F
O
N
O
T
M
E
C
H
R
M
L
A
T
E
S
I
L
L
U
T
C
.0
.6
.4
.8
.2
M D Y
H N L
S Y D
A D L
T Y O
A T H
R U H
D X B
K H I
F E N
R I O
S C L
N Y C
0
+12
+13
+14
-
12
-
11
-
10
-
9
-
8
+11
+10
+9.5
+9
+8
+7
+1
-
1
-
2
-
3
-
4
-
5
-
6
-
7
+2
+3
+4
+5
+5.5
+6
S
F
T
T
M
S
W
24
12
8
4
16
20
SMT
OFF
ON
1
31
1
31
1
Month indication
“Month” corresponds to one of
the 12 zones shown in the figure
below.
Each number means month.
1
2
3
4
5
6
7
8
9
10
11 12
Year indication
“Year” corresponds to the years
since leap year and is indicated with
markers in the zone of each month.
Years since leap year:
0
(Leap year)
Years since leap year:
1
Years since leap year:
2
Years since leap year:
3
0
1
2
3
N
O
O
K
R
X
G
P
S
R
X
T
M
E
M
L
A
F
F
O
N
O
T
M
E
C
H
R
M
L
A
T
E
S
I
L
L
U
T
C
.0
.6
.4
.8
.2
LON
P A R
A K L
T B U
M D Y
H N L
A N C
L A X
N O U
S Y D
A D L
T Y O
B J S
BKK
A T H
R U H
D X B
K H I
D E L
D A C
P D L
F E N
R I O
S C L
N Y C
C H I
D E N
0
+12
+13
+14
-
12
-
11
-
10
-
9
-
8
+11
+10
+9.5
+9
+8
+7
+1
-
1
-
2
-
3
-
4
-
5
-
6
-
7
+2
+3
+4
+5
+5.5
+6
S
F
T
T
M
S
W
24
12
8
4
16
20
SMT
OFF
ON
7
CITIZEN WATCH CO., LTD.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Citizen Cal F900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Citizen Cal F900 in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Citizen Cal F900

Citizen Cal F900 User Manual - English - 116 pages

Citizen Cal F900 User Manual - Dutch - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info