553906
3
Zoom out
Zoom in
Previous page
1/21
Next page
3. MODE CHANGE OVER
Push the (M)(lower right) button to switch between modes as shown below
Note: Be sure to check the mode hand to ensure that the watch is set in the desired
mode for use. Pressing the (M)(lower right) accidentally during operation may occur.
4. BEFORE USE
Before use, follow the procedure below to ensure that all watch components are
in proper working order.
Zero Position Confirmation Check
1. Check each hand positioned as listed below
Confirm and correct if necessary
Hour Hand 12:00
Minute Hand 0 minutes
Second Hand 0 seconds
(2) If the watch hands are not positioned as above, follow the Zero position
setting procedures to ensure proper use
Push the (A) (B) or (C) button, with the (M) button in the normal position,
to activate the circular graphic display minute scale, hand movement check
ZERO POSITION SETTING
1. Pull the (M) button out to the 1
st
step position.
Reset the Watch, see section “All Reset
Function
Push the (A) button to move the second
hand to the 0 position.
Push the (B) button to align the arrows on
the minutes scale and dial.
Push the (C) button to move the
hour/minute hands to the 12:00 position.
2. Push the (M) button in to the normal position to complete setting procedures.
Any strong shock to the watch may cause the hands to shift from the “0”
position. In this case, reset to the correct Zero position.
Press and hold down either (A) (B) or (C) buttons for the quick-advance
feature
Occasionally check to ensure the hands are in the correct Zero Position
Slight irregular movement may occur when setting the second hand Zero
position. This movement is normal and has no adverse effect on any watch
function.
TME
Normal
time mode
R-1
Race 1
R-2
Race 2
R-3
Race 3
>0<
Zero Position
Confirmation
CHR
Stop-Watch
Mode
TMR
Timer
Mode
ALM
Alarm
Mode
Circular graphic display
minute scale
Return to Table of Contents
Return to Table of Contents
to “0” mode
(Zero Position confirmation mode)
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Citizen Cal 6840 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Citizen Cal 6840 in the language / languages: English as an attachment in your email.

The manual is 0,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info