588919
8
Zoom out
Zoom in
Previous page
1/10
Next page
8
The following function only appears, if switched on in the set-
ting mode (for the measuring of the cadence you need the separately
available cadence set).
CAD – Cadence
Indicates the current cadence (rpm = rounds
per minute)
Range: 0 to 250 rpm
ØAverage Cadence
Subfunction of “Cadence”
Indicates the average cadence.
Range: 0 to 250 rpm
MAX – Maximum Cadence
Subfunction of “Cadence”
Indicates the maximum reached cadence.
Range: 0 to 250 rpm
The following functions (heart rate and calorie consumption) only
appear, if heart rate is switched on in the setting mode (for the mea-
suring of heart rate you need the separately available heart rate-set).
HR – Heart Rate
Indicates the current heart rate (bpm = beats
per minute)
Range: 0 to 250 bpm
On the right side of the lower display an arrow
shows, whether the current heart rate is below
(t), within (st) or above (s) the set heart rate limits.
Ø - Average Heart Rate
Subfunction of “Heart Rate”
Indicates the average heart rate (since last
reset).
Range: 0 to 240 bpm
MAX – Maximum Heart Rate
Subfunction of “Heart Rate”
Indicates the maximum heart rate reached
(since last reset).
Range: 0 to 240 bpm
Training time below the lower limit set for
heart rate
Subfunction of “Heart Rate”measurement func-
tion.
Displays the training time during which heart
rate dropped below the lower limit set.
(since last reset).
Range: 0 to 9:59:59 h
Training time within the limits set for
heart rate
Sub-function of the heart rate function.
Indicates the training time during which heart
rate was within the limits set (since last reset).
Range: 0 to 9:59:59 h
Training time above the upper limit set for
heart rate
Sub-function of heart rate function.
Indicates the training time during which heart
rate exceeded the upper limit set (since last
reset).
Range: 0 to 9:59:59 h
kCal – Calorie Consumption
Indicates the current calorie consumption (since
last reset).
Range: 0 to 99999 kCal
TOT – total calorie consumption
Subfunction of “Calorie Consumption”
Indicates the total calorie consumption (since last
reset or battery change)
Range: 0 to 99999 kCal
7. PC Analysis / PC Transfer
CM 8.2 is able to analyse the recorded tours on your PC (optional USB-
Interface needed).
To start recording, press the left and right buttons simultaneously for 3
seconds before starting the tour. The daily values will be deleted (0).
“Reset” will be displayed briefly and then CM 8.2 will start recording
(during recording the mountain symbol
will flash in the upper
display).
At the end of the tour, press the left and right buttons simultaneously
for 3 seconds again to stop the recording (mountain symbol will stop
flashing).
Route markers:
During a recording, route markers can be set (at least every 20
seconds). This is done by briefly pressing right and left button simul-
taneously.
To transfer the recorded values to your PC, you will need the USB-
Interface (for the installation you will need to insert the CD with the
“Driver” information). Then open the program (on disc) and start the
transfer of the values.
At the CM 8.2 start function “PC-Connection” (choose “PC-Link”/”PC
Verb” and confirm with centre button. “LINK”/”VERB” will be displayed.
To start connection shortly press left and right buttons simultane-
ously).
After the transfer “PC Link” / “PC Verb.” will be displayed automati-
cally.
8. CICLOInZone
®
Philosophy and use
CICLOInZone
®
is a solution for the very best personalisation of your
training routine.
It is possible to calculate the optimum training threshold with the
CICLOInZone
®
function on the basis of your personal data and your
pulse rate when at rest.
CICLOInZone
®
is the ideal solution for personalised cardio training
applied to any sport, from jogging and cross-country running to road
and indoor cycling.
Improve your fitness? – Lose weight? – Train whilst always taking your
health into consideration? Everyone will find the correct aim to follow in
their training. But how do you train to achieve those aims in the most
efficient possible manner? How do you find the right intensity of effort
during the training? CICLOInZone
®
is the optimum training ZONE for
effort, resistance and weight loss.
What does CICLOInZone
®
do?
It calculates the optimum training zone for effort, resistance and weight
loss.
The values vary from person to person and they offer a valid training
support always staying between 70 % and 85 % of the maximum
heart rate.
(+/- 5 % of tolerance, taking into consideration the actual heart rate
when at rest and the level of training).
The question of burning fat is seen in the “correct” light with
CICLOInZone
®
on the basis of the personal data collected.
1
km/h
SPD
1
2
km/h
SPD
1
TM
3
km/h
SPD
1
DST
4
km/h
SPD
1
DST
km/h
SPD
1
TM
5
km/h
SPD
1
TM
6
km/h
SPD
1
TM
7
8
km/h
SPD
1
TM
2
9
km/h
SPD
1
TM
10
km/h
SPD
1
TM
11
km/h
SPD
1
TM
12
km/h
SPD
1
TM
13
km/h
SPD
1
TM
14
km/h
SPD
1
TM
15
km/h
SPD
1
TM
16 17 18 19 20 21
22 23 24 25
km/h
SPD
1
TM
km/h
SPD
1
TM
km/h
SPD
1
TM
km/h
SPD
1
TM
km/h
SPD
1
TM
km/h
SPD
1
TM
km/h
SPD
1
TM
km/h
SPD
1
TM
km/h
SPD
1
TM
km/h
SPD
1
TM
1
km/h
SPD
1
2
km/h
SPD
1
TM
3
km/h
SPD
1
DST
4
km/h
SPD
1
DST
km/h
SPD
1
TM
5
km/h
SPD
1
TM
6
km/h
SPD
1
TM
7
8
km/h
SPD
1
TM
2
9
km/h
SPD
1
TM
10
km/h
SPD
1
TM
11
km/h
SPD
1
TM
12
km/h
SPD
1
TM
13
km/h
SPD
1
TM
14
km/h
SPD
1
TM
15
km/h
SPD
1
TM
16 17 18 19 20 21
22 23 24 25
km/h
SPD
1
TM
km/h
SPD
1
TM
km/h
SPD
1
TM
km/h
SPD
1
TM
km/h
SPD
1
TM
km/h
SPD
1
TM
km/h
SPD
1
TM
km/h
SPD
1
TM
km/h
SPD
1
TM
km/h
SPD
1
TM
1
km/h
SPD
1
2
km/h
SPD
1
TM
3
km/h
SPD
1
DST
4
km/h
SPD
1
DST
km/h
SPD
1
TM
5
km/h
SPD
1
TM
6
km/h
SPD
1
TM
7
8
km/h
SPD
1
TM
2
9
km/h
SPD
1
TM
10
km/h
SPD
1
TM
11
km/h
SPD
1
TM
12
km/h
SPD
1
TM
13
km/h
SPD
1
TM
14
km/h
SPD
1
TM
15
km/h
SPD
1
TM
16 17 18 19 20 21
22 23 24 25
km/h
SPD
1
TM
km/h
SPD
1
TM
km/h
SPD
1
TM
km/h
SPD
1
TM
km/h
SPD
1
TM
km/h
SPD
1
TM
km/h
SPD
1
TM
km/h
SPD
1
TM
km/h
SPD
1
TM
km/h
SPD
1
TM
1
km/h
SPD
1
2
km/h
SPD
1
TM
3
km/h
SPD
1
DST
4
km/h
SPD
1
DST
km/h
SPD
1
TM
5
km/h
SPD
1
TM
6
km/h
SPD
1
TM
7
8
km/h
SPD
1
TM
2
9
km/h
SPD
1
TM
10
km/h
SPD
1
TM
11
km/h
SPD
1
TM
12
km/h
SPD
1
TM
13
km/h
SPD
1
TM
14
km/h
SPD
1
TM
15
km/h
SPD
1
TM
16 17 18 19 20 21
22 23 24 25
km/h
SPD
1
TM
km/h
SPD
1
TM
km/h
SPD
1
TM
km/h
SPD
1
TM
km/h
SPD
1
TM
km/h
SPD
1
TM
km/h
SPD
1
TM
km/h
SPD
1
TM
km/h
SPD
1
TM
km/h
SPD
1
TM
1
km/h
SPD
1
2
km/h
SPD
1
TM
3
km/h
SPD
1
DST
4
km/h
SPD
1
DST
km/h
SPD
1
TM
5
km/h
SPD
1
TM
6
km/h
SPD
1
TM
7
8
km/h
SPD
1
TM
2
9
km/h
SPD
1
TM
10
km/h
SPD
1
TM
11
km/h
SPD
1
TM
12
km/h
SPD
1
TM
13
km/h
SPD
1
TM
14
km/h
SPD
1
TM
15
km/h
SPD
1
TM
16 17 18 19 20 21
22 23 24 25
km/h
SPD
1
TM
km/h
SPD
1
TM
km/h
SPD
1
TM
km/h
SPD
1
TM
km/h
SPD
1
TM
km/h
SPD
1
TM
km/h
SPD
1
TM
km/h
SPD
1
TM
km/h
SPD
1
TM
km/h
SPD
1
TM
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ciclo CM 8.2 Master at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ciclo CM 8.2 Master in the language / languages: English as an attachment in your email.

The manual is 1,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ciclo CM 8.2 Master

Ciclo CM 8.2 Master User Manual - German - 10 pages

Ciclo CM 8.2 Master User Manual - Dutch - 10 pages

Ciclo CM 8.2 Master User Manual - Danish - 2 pages

Ciclo CM 8.2 Master User Manual - French - 10 pages

Ciclo CM 8.2 Master User Manual - Italian - 10 pages

Ciclo CM 8.2 Master User Manual - Spanish - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info