564058

Chacon 54756 Manual

4
Zoom out
Zoom in
Previous page
1/4
Next page
EN - Remote control & 3 Modules
(54755, 54756, 54760, 54797)
Install the receiver.
1° Cut the power o.
2° Connect the AC 220V cabels to the IN terminals and the light cables to the
OUT terminals.
3° Turn the power on, the led light blinks.
4° Link module and remote control (cf. Link code)
Link Code :
1° Bring the transmitter near the receiver, push the socket learning button once.
2° Receiver led will blink slowly, push the remote control ON button.
3° Receiver connected lamp will blink twice, code is confirmed and led stops
blinking.
Install the transmitter :
See drawings.
- On/O : Push On (O) button tu turn on (o) the light or device.
- Dimmer : Push On button twice, light begins to dim. Push once again, light
stops at chosen intensity. To dim again, restart the process.
* WORKS ONLY WITH DIMMER RECEIVERS.
Delete a code :
1° Push the learning button on receiver once, led blinks slowly.
3° Push the transmitter OFF button of the remote control.
4° Receiver connected lamp will blink twice, code is deleted and led stops
blinking. Repeat Link steps for re-setting.
Delete all memories :
1° Push the learning button on receiver for 6 seconds, led blinks.
2° Release and push again once.
3° Receiver connected lamp will blink twice, memory is erased and led stops
blinking.
* ALL PROGRAMMED MEMORY WILL BE DELETED.
Receiver has 6 memory settings :
Self program function receiver has 6 memory settings. It can be programmed as
to your requirement with special eect. It can be programmed to switch ON at
one time individually or programmed with dierent combinations switching.
This means one receiver can be programmed into max. 6 dierent combination.
Example : if there is 3 receivers (1. lamp shade, 2. night light, 3. fan). Receiver 1,2,3
can be control individually with transmitter button 1,2,3. Receiver 1,3 can be
programmed with transmitter button 4, (lamp shade and fan ON/OFF at same
time). Receiver 1,2,3 can also be programmed into group function ALL ON or OFF
at same time into group button (lamp shade, night light and fan ON/OFF at same
time)
Fault finding:
No activation : Check battery polarity or running out battery. Check code
program sucessful.
Caution:
Do not place two receivers near each other, the distance should be above 1
meter. Transmission distance is about 30m, but it can be reduced depending on
wall thickness or wireless environment.
Warning!
Do not use in samp places.
www.di-oCFt%FDMBraUJPOT$&t
Hereby DIO declares that the device is in conformity with the essential requirements and the
other relevant disposals of the directive 1999/5/CE.
IMPORTANT (DirectivF&$ WEEE) :
During the sorting of your waste, we ask you to respect the
regulations in eect regarding their elimination.
We thank you for depositing them in a place allowed to
this purpose and respecting the environment.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Chacon 54756 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Chacon 54756 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 0,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info