564063

Chacon 54505 Manual

5
Zoom out
Zoom in
Previous page
1/5
Next page
EN – Wireless wall switch & Module
(54501, 54511, 54502, 54512, 54505)
Install the module (receiver) :
1° Disconnect main power before installation.
2° Dismantle screw tab holder for wall box insertion. Connect AC wire and load
(lamp) to receiver block terminal.
3° Connect main power on., LED indicator on receiver should light on.
4° Link the module to transmittor (see Programm).
Install the wall switch:
1° Ax the base of the transmitter with the supplied screws or double-sided tape
to the wall.
2° Ax the frame to the base.
3° Ax the rocker to the frame (please pay attention to position : ‘UP’ is ).
Dimmer Function : Push On button twice, light begins to dim. Push once again,
light stops at chosen intensity. To dim again, restart the process.
* WORKS ONLY WITH DIMMER MODULE (300W/54556).
On/O Function : Push On (O) button tu turn on (o) the light or device.
Link Code :
1° Bring the transmitter near the receiver, push the module learning button once.
2° Module led will blink slowly, push the wall switchON button.
3° Module connected lamp will blink twice, code is confirmed and led stops
blinking.
Delete a code :
1° Push the learning button on module once, led blinks slowly.
3°
Push the transmitter OFF button of the wall switch.
4° Receiver connected lamp will blink twice, code is deleted and led stops
blinking. Repeat Link steps for re-setting.
Delete all memories :
1° Push the learning button on module for 6 seconds, led blinks.
2° Release and push again once.
3° Receiver connected lamp will blink twice, memory is erased and led stops
blinking.
* ALL PROGRAMMED MEMORY WILL BE DELETED.
Receiver has 6 memory settings :
Self program function receiver has 6 memory settings. It can be programmed as
to your requirement with special eect. It can be programmed to switch ON at
one time individually or programmed with dierent combinations switching.
This means one receiver can be programmed into max. 6 dierent combination.
Example : if there is 3 receivers (1. lamp shade, 2. night light, 3. fan). Receiver 1,2,3
can be control individually with transmitter button 1,2,3. Receiver 1,3 can be
programmed with transmitter button 4, (lamp shade and fan ON/OFF at same
time). Receiver 1,2,3 can also be programmed into group function ALL ON or OFF
at same time into group button (lamp shade, night light and fan ON/OFF at same
time)
Fault finding:
No activation : Check battery polarity or running out battery. Check code
program sucessful. Check the module fuse.
Caution:
Do not place two receivers near each other, the distance should be above 1
meter. Transmission distance is about 50m, but it can be reduced depending on
wall thickness or wireless environment.
Warning! Do not use in samp places. Disconnect main power before wiring
installation and fuse changing. DO NOT OVERLOAD.
www.chacPOCFt"TTJTUBODFt5ÏMÏDIBSHFNFOUt 54505
Hereby CHACON declares that the device is in conformity with the essential requirements
and the other relevant disposals of the directive 1999/5/CE:.
IMPOR5"/5%Jrective 2002/96/EC WEEE) :
During the sorting of your waste, we ask you to respect the
r
egulations in e
ect regarding their elimination.
We thank you for depositing them in a place allowed to
this purpose and respecting the environment.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Chacon 54505 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Chacon 54505 in the language / languages: English, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 0,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info