780068
5
Zoom out
Zoom in
Previous page
1/20
Next page
4
Insert should be ush
with cut end of the
fork steerer tube
5. To trim fork steerer, use only a saw suitable for cutting carbon, and
a cutting guide.
6. Carefully sand a bevel to the inside of the cut end of the steerer
tube to t the insert.
7. Dry t insert to check that it is ush with the cut end of the steerer
tube.
8. Use isopropyl alcohol to clean the inside of the steerer tube and
the outside of the insert.
9. Fully mix the two-part epoxy and apply to the outer surface of the
insert with the wooden mixing stick.
10. Slide the insert into the steerer while rotating it slowly until the
ared end sits ush with the top of the steerer.
11. Wipe away any excess glue from the outside surface of the steerer
tube with the isopropyl alcohol wipe.
12. Set the fork aside and allow it to sit undisturbed for the full curing
period.
Do not attempt to t the fork into a bike prior to the completion of
the full curing period.
Improper cutting of the steerer tube could cause a failure that
results in severe injury or death.
Do not exceed 50 mm maximum total spacer height,
including the bearing cap.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cervelo R3 DISC - 2017 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cervelo R3 DISC - 2017 in the language / languages: English as an attachment in your email.

The manual is 4.06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cervelo R3 DISC - 2017

Cervelo R3 DISC - 2017 User Manual - German - 20 pages

Cervelo R3 DISC - 2017 User Manual - Dutch - 20 pages

Cervelo R3 DISC - 2017 User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info