791742

Celestron 47011 Manual

1
Zoom out
Zoom in
Previous page
1/15
Next page
Personal Weather Station with Wireless
Remote Sensor
Model # 47011
Set Up the Power for the Receiver
Plug the socket of the AC Adapter into the
back of the Receiver unit (shown in bottom
right image below). Then install the plug
required for your location (four plugs are
supplied-USA/Europe/UK/Australia).
To change plugs push down on the
indented section (with a small screwdriver
or other small object) and pull the plug away from the adapter --- then
install the plug you want to use into the adapter until you hear it click.
Finally, insert the plug into an AC wall type socket and the display will be seen on the Receiver.
For optimum performance, please place the Receiver away from metal and other sources of
interference such as mobile phones, TVs, computers, appliances, etc.
Set Up the Power & Make Settings for the Wireless Remote Sensor
Remove the four small screws from the rear door of the sensor with a small Phillips
head screwdriver. Insert two AAA batteries (user supplied) according to the polarity as
indicated on the sensor (see center image). Set the switch (on the right side) to 1 (for
Channel 1), push/toggle the center switch so readings will be shown in “C”
(Centigrade) or “F” (Fahrenheit). Then push the left switch “TX” which will transmit
the RF signal from the sensor to the Receiver. The Sensor itself will display the outside
temperature and humidity (see left image).
The Sensor can be mounted up to 100 feet (30 meters) in an open area from the Receiver to
communicate with it. The Sensor has a place on the rear of the unit to mount/hang it securely to any
surface that is secure.
If the battery power becomes low on the Sensor, a “low battery icon” will appear on the LCD display
and change batteries to ensure a strong signal is being sent to the Receiver.
The Receiver has two LR44 batteries installed so that the time and other settings will remain in
memory when the Receiver loses power for some reason. Pull out the plastic insulation sheet from the
back to make it functional.
ENGLISH
1 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Celestron 47011 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Celestron 47011 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0.5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info