791762
6
Zoom out
Zoom in
Previous page
1/8
Next page
After installing the software confirming the microscope
camera is working with your software, you are ready to
attach the camera to the microscope. This step can be
done before the software install, if you prefer, just make
sure to follow the installation steps with the camera
disconnected.
First, you need to remove the zoom eyepiece Fig. 1 (1)
from the eyepiece tube Fig. 1 (2) by turning it past the stop
at the 10x position. Put a little pressure on the eyepiece
(and one hand on the base for support) and continue
turning it counterclockwise to unthread it from the
eyepiece tube. Take the protective cap off of the camera.
Next, thread the camera into the eyepiece tube (clockwise)
without overtightening. Lastly, plug the USB cable into an
open USB port on your computer.
When viewing or imaging a specimen slide or object, you
can change the orientation of the image on the computer
screen by rotating the camera to the position you desire
generally do this counterclockwise so you don’t tighten the
camera in the eyepiece tube.
Left to right below – digital camera with USB cable- (Figure
7a), eyepiece tube (Figure 7b), camera attached to eyepiece
tube (Figure 7c), microscope with camera attached to a
computer with the USB cable (Figure 7d).
The software package you installed is called VP-EYE.
The software allows you to observe specimen slides or
objects on your computer. When you view with the camera
installed, the magnification depends on the objective lens
you are using and also the size of your PC monitor.
Plug in the USB cable of the microscope camera to your
computer.
VP EYE contains basic image capture and organization for
your photos (snapshots) and videos. Click on the VP EYE
icon to begin (or from the programs in the Start menu of your
computer). The software is very intuitive and easy to use.
Note: The software package may not have some
of the programs listed due to the version of
this software package. You can print out a short
instruction sheet from the installed software. If you
need additional information about the software, visit
http://www.mmedia.com.tw.
ATTACHING YOUR DIGITAL CAMERA TO YOUR MICROSCOPE
VP EYE SOFTWARE
Figure 7a Figure 7b Figure 7c Figure 7d
MAGNIFICATION USING DIGITAL CAMERA — ESTIMATES
4x Objective using a 14” monitor — 340x using a 17” monitor — 400x
15x Objective using a 14” monitor — 1200x using a 17” monitor — 1380x
30x Objective using a 14” monitor — 2000x using a 17” monitor — 2400x
5
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Celestron 44320 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Celestron 44320 in the language / languages: English as an attachment in your email.

The manual is 0.96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Celestron 44320

Celestron 44320 User Manual - German - 8 pages

Celestron 44320 User Manual - French - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info