471917
17
Zoom out
Zoom in
Previous page
1/20
Next page
OS 1.1
17
Troubleshooting
If a malfunction occurs, check the following items before contacting a dealer for service.
Trouble Check items Remedy
The FORMAT YES/NO prompt does not appear.
Are the two MODE buttons held down firmly?
Ensure to hold down the two MODE/SELECT button for two more seconds after pressing and releas-
ing RESTART button.
The liquid crystal screen appears dark or there are some dark spots.
Was it left for a long time under direct sunlight?
It will go back to normal after a few hours once it is out of the sunlight. Data will not be effected.
Display response is slow.
Was the ambient temperature too low [below 0°C (32°F)]?
It will go back to normal when the temperature rises. Data will not be effected.
No display
Is the computer asleep?
Push a button to wake up. Push Restart if buttons do not respond. Computer could be frozen.
Is the battery worn out?
Replace the battery with a new one (CR2032). After the battery is replaced, be sure to press RE-
START button.
Meaningless display appears.
Press RESTART button.
Current Speed is not working properly.
Check if the wire is broken or damaged.
Replace the bracket sensor set with a new one.
Check the clearance between the speed sensor and the magnet.
Check if the mark line of the speed sensor and the magnet is aligned.
Adjust the positions.
Check if there is any object on the contacts of the main unit or the bracket.
Clean contact. Main unit is often stained with sweat. Periodically wash it with mild soap and wipe dry.
Measurement does not stop even though START/STOP button is pressed.
Is the Auto Mode on?
When the Auto Mode is on, START/STOP button does not start or stop measurement. Turn the Auto
Mode off. (Refer to "Auto mode" in page 16.)
The size of the figures on the screen is reduced.
When the bigger font size is selected (100%, 70%, 50%), and if the number of digits for trip distance
and total distance exceed the maximum number of digits, the size is automatically reduced to fit on the
screen.
The last ride day data is not correct.
Is the clock time setting correct?
The last ride day data is saved when the clock time passes the midnight. Therefore, if your clock is not
correctly set, the data shown will be incorrect.
Is the unit measuring?
The last ride day data is not updated unless it newly measures data. (See page 10.)
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cateye OS 1.1. at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cateye OS 1.1. in the language / languages: English as an attachment in your email.

The manual is 0,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info