649082
33
Zoom out
Zoom in
Previous page
1/34
Next page
688217 nl en ma 2016
33
ENGLISH
FILTER CLEANING
Caution! Make sure the splash shield is installed
correctly before use of the microwave oven!
Filter Filter screws
The front filter serves as the air inlet; the filter should be cleaned on time to keep the chamber clean.
1. Turn counterclockwise to unscrew and take down the filter; and wash it with warm soap water;
2. Install the filter screen Tighten clockwise the screws to fix the filter;
3. Make sure the filter is installed before use of the microwave oven;
4. The factory setting has the function to remind the user of washing the filter every 30 days.
SPLASH SHIELD CLEANING
1. Detaching: Hold the two buckle positions in front of the splash shield with your hands (as shown by
the arrows). Exert your strength following the direction of the arrows and pull downwards after you
have pulled out the buckles:
2. Wash the splash shield:
3. Installation: Pick up the splash shield and obliquely put it into the chamber in the way that insert the
first pin at the rear into the positioning hole on the rear plate of chamber, then push the other side to
insert all positioning pins into their positioning holes.
INSTALLATION (SUPPLEMENT)
1. The switching operation of this microwave oven can cause voltage fluctuations on the supply line.
The operation of this oven under unfavorable voltage supply conditions can have adverse effects.
This device is intended for the connection to a power supply system with a maximum permissible system
impedance Zmax of 0.3 Ohms at the interface point of the user’s supply. The user has to ensure that
this device is connected only to a power supply system which fulfills the requirement above.
If necessary, the user can ask the public power supply company for the system impedance at the inter-
face point.
2. If there is no equipotential bonding conductor in the electric supply, an external equipotential bonding
conductor must be installed at the rear of the appliance (see symbol). This terminal shall be in effective
electrical contact with all fixed exposed metal parts and shall allow the connection of a conductor
having a nominal cross-sectional area up to 10 mm².
Symbol for the external connection of equipotential bonding conductors.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Caterchef 688.217 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Caterchef 688.217 in the language / languages: English, Dutch as an attachment in your email.

The manual is 6,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info