28579
57
Zoom out
Zoom in
Previous page
1/60
Next page
57
Appendix
z Try performing the following steps, which can return the projector to normal operation.
1. Press the [ ] (power) key to turn off the projector.
2. After the projectors cool down is finished and the fan is completely stopped, unplug
the AC power cord.
3. Plug the power cord back in and turn the projector back on again.
If the power off confirmation message does not appear when you press the [ ]
(power) key, unplug the AC power cord and wait for at least 10 minutes. Then plug
the power cord back in and the projector back on again.
If normal operation does not resume after you perform the above steps, take the
projector to your retailer or authorized CASIO Service Center.
The aspect ratio of the
screen has changed
considerably.
Using the [AUTO] key to perform automatic
adjustment in the case of RGB input can cause
the aspect ratio of the screen to change, and the
projected image to become larger. Whether this
happens depends on the slideshow, movie, or
other scene being projected.
J To return to the image to its original state, turn
off Detailed Settings J Advanced Settings 1 J
Auto Adjust, and then press the [RGB/
COMPONENT] key.
page 41
A blue screen is
displayed.
Certain operating conditions can cause the blue
screen to be displayed when the computers
resolution setting is high.
J Use a setting of 1024 × 768 / 60Hz.
The remote controller
does not work.
The remote controller batteries may be dead.
J Replace the batteries (see Loading Remote
Controller Batteries).
Users Guide
(Basic
Operations)
The remote controller may be too far from the
projector.
J Make sure the remote controller is within the
allowable range when you operate it.
page 48
The TEMP or LAMP
indicator is flashing or lit.
J See Error Indicators under Indicators and
Alert Tones.
Users Guide
(Basic
Operations)
The message It is time
to replace the lamp. is
being projected.
It is time to replace the lamp.
J Replace the lamp (see Replacing the Lamp).
Users Guide
(Basic
Operations)
The message The lamp
has exceeded its service
life!. is being projected.
The allowable life for the lamp has been
exceeded, and the projector will not turn on.
J Replace the lamp (see Replacing the Lamp).
Users Guide
(Basic
Operations)
Problem Cause and Recommended Action See
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio XJ360 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio XJ360 in the language / languages: English, Dutch as an attachment in your email.

The manual is 0,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio XJ360

Casio XJ360 User Manual - German - 60 pages

Casio XJ360 User Manual - French - 60 pages

Casio XJ360 User Manual - Italian - 60 pages

Casio XJ360 User Manual - Spanish - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info