215953
38
Zoom out
Zoom in
Previous page
1/40
Next page
Troubleshooting
E-38
Check the following items whenever you experience any problem with the projector.
POWER
TEMP
LAMP
: Amber flashing
Red steady
:–
: Red steady
The allowable life for the lamp has been exceeded, and the
projector will not turn on. Replace the lamp following the steps
under Replacing the Lamp” (page E-29).
Message : The lamp has
exceeded its service
life! The projector will
not turn on until you
replace the lamp.
Projector Troubleshooting
Problem Cause and Recommended Action See
The projector does
not turn on when I
press the [ ]
(power) key.
If the POWER/STANDBY indicator is not lit, the AC
power cord may not be connected correctly.
Make sure the AC power cord is connected
correctly to the projector and the power outlet
(see “Turning On the Projector”).
page E-20
If the TEMP or LAMP indicator remains flashing or lit,
it means some type of error has occurred.
See “Error Indicators and Warning Messages”
under “Indicators”.
page E-34
The projector does
not project any
image from the
connected device.
The connected computer or video device may not be
turned on, or it may not be outputting a video signal.
Make sure the connected computer or video
device is turned on, and perform the required
operation on it to output a video signal.
The correct input source is not selected on the
projector.
On the projector, select the input source that
corresponds to the device whose image you are
trying to project (see “Selecting the Input
Source”).
page E-23
The projector does
not correctly project
the image from the
connected device.
Images may not project correctly when you have the
component output terminal of a video device
connected to the COMPUTER terminal of the projector.
Try using the projector’s AV terminal (see
“Connecting to a Standard Video Device”).
page E-17
When RGB/
Component is
selected as the input
source, the color of
the projected image
or the image itself is
abnormal.
The wrong option (“Component” or “RGB”) may be
selected for the “Input Settings COMPUTER
Terminal” setting on the setup menu. The image will
not be projected correctly if “Component” is selected
while the projector’s COMPUTER terminal is connected
to the RGB output terminal of a computer, or if “RGB”
is selected while the projector’s COMPUTER terminal
is connected to the component video output terminal
of a video device.
Use the setup menu to change the “Input
Settings COMPUTER Terminal” setting to
“Auto” to correct the problem.
User’s Guide
(UsersGuide_
English.pdf)
Indicator/Error Message Description and Required Action
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio xj s32 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio xj s32 in the language / languages: English as an attachment in your email.

The manual is 1,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info