288820
17
Zoom out
Zoom in
Previous page
1/19
Next page
65
Using the Camera with a Connected Device
Computer (Video Capture)
VIDEO
You can use the special video cable that comes with the camera to
connect directly to the VIDEO IN terminal of a personal computer
equipped with video capture capabilities.
To transfer camera images to a personal computer (video
capture)
1. Use the special video cable that comes with the camera to connect
to the VIDEO IN terminal of the computer.
2. Enter the camera Playback Mode and display the image you want
to send.
3. Perform the required operation on the computer.
Consult the owner’s guide that comes with the computer or its video
capture board for details about how to set up to capture images.
Important!
With this configuration, you cannot send images from the personal
computer to the camera.
The camera can be connected directly to a personal computer or
video capture board that is equipped with a VIDEO IN terminal
(RCA pin jack). It cannot be connected directly to an S-VIDEO ter-
minal.
66
Reference
Troubleshooting
No power
Sudden power
failure
indicator
on LCD
No recording
when shutter
button is
pressed
Power failure
during self-timer
operation
indicator on
LCD
indicator on
LCD
1. Batteries not loaded
correctly.
2. Dead batteries
3. Wrong AC adaptor
1. Operation of Auto
Power Off
2. Low battery power
Use of manganese
batteries.
Power will automatically
turn off shortly.
Function switch sets to
PLAY.
Low battery power
Over exposure
Under exposure
1. Correctly load batter-
ies (page 13).
2. Replace batteries with
new ones (page 13).
3. Use only recom-
mended AC adaptor .
1. Turn power back on.
2. Replace batteries with
new ones (page 13).
Replace manganese
batteries with alkaline
batteries.
Replace all four batteries
with a set of new ones
(page 13).
Set function switch to
REC.
Replace batteries (page
13).
Change aperture switch
setting to [] (page 26).
Change aperture switch
setting to [] (page 26).
Symptom Probable Cause Action
Power Supply
Recording
67
Symptom Probable Cause Action
Poor LCD image
focus
Poor color and
brightness when
indoors
Recorded image
has greenish
tinge.
Color of
recorded image
is strange.
No +/– button
operation during
multi-page dis-
play
All pages do not
appear during
auto play.
Use NORMAL for scen-
ery and group photos,
and MACRO for close-
ups (page 24).
Shoot under incandes-
cent or other non-fluores-
cent lighting (page 21).
Change aperture setting
to []. Note that this con-
dition is due to CCD char-
acteristics, and does not
indicate camera malfunc-
tion.
1. Reorient the camera
so that light is not shin-
ing directly into lens.
2. This difference does
not indicate a problem
or malfunction.
Wait until an image is on
the LCD before perform-
ing a button operation.
Unhide protected memo-
ry pages (page 52).
Incorrect NORMAL/
MACRO switch setting
Indoor fluorescent lighting
Strong direct or reflected
sunlight
1. Reflection from sun-
light or light from an-
other source
2. Difference between
Record Mode and
Playback Mode char-
acteristics.
Button operation during
page change
Protected memory pages
are hidden.
Recording
Playback
68
Reference
Symptom Probable Cause Action
1. Set function switch to
PLAY (page 31).
2. Connect correctly us-
ing the special video
cable that comes with
the camera (page 32).
3. Set up the TV cor-
rectly.
Unhide protected memo-
ry pages by holding down
[–] while turning power on
(page 52).
Unhide protected memo-
ry pages by holding down
[–] while turning power on
(page 52).
Unhide protected memo-
ry pages by holding down
[–] while turning power on
(page 52).
Unhide protected memo-
ry pages by holding down
[–] while turning power on
(page 52).
Troubleshooting
1. Function switch set to
REC
2. Incorrect camera-TV
connection
3. Wrong TV set up
Protected memory pages
are hidden.
Protected memory pages
are hidden.
Protected memory pages
are hidden.
Protected memory pages
are hidden.
Camera is con-
nected to a TV,
but LCD monitor
contents do not
appear on TV
screen.
Some images
are missing.
Cannot use
multi-page dis-
play.
Cannot protect
memory pages.
ALL DATA IS
PROTECTED!
stays on monitor
and images do
not appear.
Playback
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio qv 200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio qv 200 in the language / languages: English as an attachment in your email.

The manual is 0,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info