506038
28
Zoom out
Zoom in
Previous page
1/31
Next page
E-27
Troubleshooting
Power Supply
Text Input
Nothing appears on the display.
Possible Cause Action
Improper display con-
trast setting
Low batteries
Batteries loaded incor-
rectly
AC adaptor is not con-
nected correctly.
Adjust display contrast.
Replace batteries.
Remove batteries and reload
them correctly.
Make sure the AC adaptor is
connected correctly.
Only blank spaces
were input.
Input the text you want to print.
Tape comes out when PRINT is pressed, but nothing
is printed on it.
Possible Cause Action
Improper print density
setting
Improper loading of
the cartridge
Dirty print head or rub-
ber roller
Adjust the print density setting.
Remove the tape cartridge and
reload it correctly.
Clean the printer head and
roller.
Printing is blurred, blotched, broken, etc.
Possible Cause Action
Ink ribbon cassette
loaded while the ink
ribbon is slack.
Remove the ink ribbon cassette
and check to make sure the ink
ribbon is not broken. Next, take
up any slack in the ink ribbon
and then reload the tape car-
tridge.
Important!
Before loading an ink ribbon
cassette into the label printer,
always make sure you take
up any slack in the ink ribbon
first.
If the ink ribbon is broken, you
must change to another ink
ribbon cassette.
Ink ribbon is being fed from the tape outlet along
with the tape.
Possible Cause Action
Tape Cutting
Using Labels
Cannot input text.
Possible Cause Action
FUNC key has been
pressed.
Press ESC to clear FUNC key
operation.
Tape does not come out when PRINT is pressed.
Possible Cause Action
Tape cartridge com-
partment cover is not
closed completely.
No more tape left in
the cartridge.
Tape jam
Securely close the tape car-
tridge cover.
Replace the tape cartridge with
a new one.
Remove the tape cartridge and
pull out the jammed tape by
hand. Cut off excess tape with
scissors, and carefully replace
the cartridge into the label printer.
Important!
Never allow the tape outlet to
become blocked and never
touch tape as it is being fed
during printing.
Cannot cut tape.
Possible Cause Action
Take the label printer to the
dealer from whom you pur-
chased it to have the tape cut-
ter blade replaced.
Printed text is cut off by tape cut operation.
Possible Cause Action
The printer is set up for
manual tape feed.
Out of tape
Be sure to press the FEED key
before performing the tape cut
operation.
Important!
When the printer is set up for
manual tape feed, the tape is
not fed automatically after print-
ing is complete.
Replace the tape cartridge with
a new one.
Tape cutter blade is
dull.
Label will not adhere to a surface.
Possible Cause Action
The backing paper is
still on the back of the
tape.
Surface is unsuitable
for affixing a tape.
Peel the backing paper from the
back of the tape to expose the
adhesive.
Labels do not adhere well to
surfaces that are rough, wet,
oily, or dirty.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio KL8100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio KL8100 in the language / languages: English as an attachment in your email.

The manual is 1,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio KL8100

Casio KL8100 User Manual - German - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info