506031
17
Zoom out
Zoom in
Previous page
1/19
Next page
E-16
To initialize the Label Printer
1. Turn power off.
2. While holding down the PRINT and ESC keys,
press ON to turn power on.
3. Keeping PRINT and ESC held down, release
the ON key only.
This prompt confirms whether or not you want to
initialize the Label Printer.
4. Press SET to initialize the Label Printer or ESC to abort the reset operation.
The following table shows the initial settings.
Troubleshooting
INT?
Action
Use only one ¥ mark.
Only two lines of text
can be input, so text
can contain only one
¥ mark.
Do not use ¥ marks.
6mm tape can have
only one line of text,
so text cannot contain
any ¥ marks.
Delete the ¥ mark to
print on 6mm tape or
switch back to a wider
tape.
Shorten the text to be
printed and try again.
Change the tape width
setting to OFF and try
printing the stamp
again.
Delete text from one of
the text memory areas
and then store the new
text.
Replace batteries.
Initialize the Label
Printer.
Problem
ERR! message
on the display.
FUL! message
on the display.
BATT message
on the display.
ERR! message
on the display.
Possible Cause
Attempt to input two ¥
marks within the same
text.
Attempt to input ¥
mark while 6mm is
specified as the tape
width.
Label text containing a
¥ mark was input and
then tape width
specification was
changed to 6mm.
(ERR! message appears
when you try to perform
a print operation.)
Text that is longer than
5.5cm when stamp
printing is selected.
Attempt to print a stamp
while 6mm is specified
for the tape width.
Both text memory areas
(AREA 1 and AREA 2)
already contain text.
Battery power is too
low.
Memory data has
become corrupted for
some reason.
Item
Display
Memory
SYMBOL
EFFECT
M-FEED
MIRROR
MEMO
DENSITY
WIDTH
Reset
Cleared
Cleared
,
CANCEL
NO
OFF
STR?
3
OFF
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio KL750 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio KL750 in the language / languages: English as an attachment in your email.

The manual is 1,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio KL750

Casio KL750 User Manual - German - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info