723405
2
Zoom out
Zoom in
Previous page
1/3
Next page
Operation Guide DQ-960/961
2
Holding down UP (+) or DOWN () changes the flashing digits at high speed.
You can set the year in the range of 2000 to 2039. The day of the week is set automatically in accordance with
the date setting.
Pressing UP (+) or DOWN () while the Time Setting Screen is on the display causes the seconds count to be
reset to 00.
Each press of UP (+) or DOWN () while the 12-hour/24-hour Timekeeping Screen is on the display toggles
between 12-hour and 24-hour timekeeping.
3. After making the settings you want, use the SET button (5) to display the Normal Timekeeping Screen.
The clock automatically returns to the Normal Timekeeping Screen if you leave a setting screen on the display for
about three minutes without performing any operation.
USING THE ALARM
The alarm sounds and the light turns on when the alarm time you set is reached. You can also use the Alarm Mode
selector (2) to select the snooze alarm feature.
Setting the Alarm Time
Use the DOWN () and UP (+) buttons (3) to set the alarm time.
Pressing the DOWN () and UP (+) buttons (3) causes the alarm time to appear in place of the date on the
display.
UP
(
+
)
DOWN
()
RESET
TEMP.
MAX/MIN
HUMIDITY
MAX/MIN
UP
(+)
DOWN
()
SET
CLEAR
°C / °F
Press to change the
alarm time setting (+)
Press to change the
alarm time setting (
)
Press to change the
alarm time setting (+)
Press to change the
alarm time setting (
)
DQ-960
DQ-961
Holding down UP (+) or DOWN () changes the digits at high speed.
Turning the Alarm On and Off
Use the Alarm Mode selector (2) on the side of the clock to turn the alarm on and off, and to select the snooze
feature.
The alarm time appears in place of the date on the display whenever the Alarm Mode selector (2) is set to ON
or SNZ.
The light also turns on for the first four seconds that the alarm sounds.
The volume of the alarm sound cycles through five levels as it sounds.
Stopping the Alarm
When alarm is sounding, press the SNOOZE/LIGHT button (1) to stop it. When the snooze feature is turned on,
the alarm will sound again in about five minutes.
To turn off the snooze feature, slide the Alarm Mode selector (2) to OFF.
GENERAL GUIDE
11
11
1 SNOOZE/LIGHT button
Press this button to illuminate the display for about four seconds.
Pressing this button while the alarm is sounding stops the alarm.
22
22
2 Alarm Mode selector
SNZ: Snooze alarm on
ON: Alarm on
OFF: Alarm off
33
33
3 UP (+) / DOWN (–) buttons
Use these buttons to change the alarm time or the setting that is flashing on the display.
44
44
4
°C/°F button
Press this button to toggle the temperature units between Celsius and Fahrenheit.
55
55
5 SET button
Use this button when setting the current time.
66
66
6 CLEAR button
Press this button to clear the currently displayed high/low temperature or humidity.
77
77
7 MAX/MIN TEMP. button
Press this button to display the high and low temperature values.
88
88
8 RESET button
Press this button to reset the clock after replacing its batteries.
99
99
9 MAX/MIN HUMIDITY button
Press this button to display the high and low humidity values.
USING THE CLOCK
1. Press the SET button (5) to cycle through the setting screens as shown below.
12-hour/24-hour
Timekeeping Screen
Time Setting ScreenMonth and Day Setting ScreenYear Setting Screen
Normal Timekeeping Screen
2. While the screen you want is displayed, use the DOWN () and UP (+) buttons (3) to change the flashing
digits.
UP
(
+
)
DOWN
()
RESET
TEMP.
MAX/MIN
HUMIDITY
MAX/MIN
UP
(+)
DOWN
()
SET
CLEAR
°C / °F
Press UP (+) to increase
the flashing digits.
Press DOWN () to decrease
the flashing digits.
Press UP (+) to increase
the flashing digits.
Press DOWN () to decrease
the flashing digits.
DQ-960
DQ-961
Alarm Mode selector
SNZ
ON
OFF
Description
The alarm sounds at the preset time for one minute, and seven more times every five
minutes thereafter. Even if you stop the alarm by pressing the SNOOZE/LIGHT
button (1), the alarm sounds again five minutes later.
The indicator
flashes on the display to indicate that the snooze feature is
activated.
The alarm sounds at the preset time for one minute.
The alarm does not sound.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio DQ-960 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio DQ-960 in the language / languages: English as an attachment in your email.

The manual is 0,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info