723372
1
Zoom out
Zoom in
Previous page
1/2
Next page
Operation Guide DQ-584/584B
ILLUSTRATION
A sticker is affixed to the glass of the clock when you purchase it. Be sure to remove the sticker before using the
clock.
Depending on the clock model, its configuration may differ somewhat from that shown in the illustration.
Current time
(Hour, minutes)
Current temperature
Date
(month – day)
PM indicator Alarm indicator
Alarm time
Snooze on indicator
Alarm on indicator
Alarm Off HR (MONTH) or MIN (DATE)
button depressed
Snooze Alarm On
GENERAL GUIDE
11
11
1 SNOOZE/LIGHT button
Press this button to illuminate the display for about three seconds.
Pressing this button while the alarm is sounding stops the alarm.
22
22
2 12 24 HR (YEAR) button
Press this button to toggle between 12-hour and 24-hour timekeeping.
Pressing this button while “CALENDAR” is selected by the Mode switch 5 advances the year setting.
33
33
3 MIN (DATE) button
Pressing this button while “TM” is selected by the Mode switch 5 advances the minute setting.
Pressing this button while “CALENDAR” is selected by the Mode switch 5 advances the day setting.
PM indicator
Hour Minutes
Press to toggle between
12-hour and 24-hour
timekeeping.
Press to advance the
minute setting.
Press to advance the
hour setting.
Year
Month Day
Press to advance the
year setting.
Press to advance the
day setting.
Press to advance the
month setting.
44
44
4 HR (MONTH) button
Pressing this button while “TM” is selected by the Mode switch 5 advances the hour setting.
Pressing this button while “CALENDAR” is selected by the Mode switch 5 advances the month setting.
55
55
5 Mode switch
NORMAL: For normal use
AL: For adjusting the alarm setting
TM: For adjusting the time setting
CALENDAR: For adjusting the date setting
66
66
6 Alarm Mode selector
SNZ: Snooze alarm on
ON: Alarm on
OFF: Alarm off
77
77
7
°C/°F button
Press this button to toggle the temperature units between Celsius and Fahrenheit.
88
88
8 Battery
SETTING THE CLOCK
1. Slide the Mode switch 5 to
“TM”. This causes the current
time to flash on the display.
2. Use the 12 24 HR (YEAR)
button 2, MIN (DATE) button
3, and HR (MONTH) button 4
to set the time. Holding down
the MIN (DATE) button 3 or
HR (MONTH) button 4
changes the corresponding
setting at high speed.
Make sure you set the correct
am/pm time if you are using 12-
hour timekeeping. The PM
indicator indicates PM times,
while nothing is indicated for AM
times.
The seconds count reverts to 00
automatically whenever you finish
adjusting the minute setting.
3. Slide the Mode switch 5 to
“CALENDAR”. This causes the
current date to flash on the
display.
4. Use the 12 24 HR (YEAR)
button 2, MIN (DATE) button
3, and HR (MONTH) button 4
to set the date. Holding down
any button advances the
corresponding setting at high
speed.
You can set the year in the range
of 1990 to 2030.
5. Slide the Mode switch 5 to “NORMAL”. This will
cause the figures on the display to stop flashing.
1
MA0507-EA
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio DQ-584 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio DQ-584 in the language / languages: English as an attachment in your email.

The manual is 0,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info