797482
2
Zoom out
Zoom in
Previous page
1/5
Next page
Operation Guide 5416
E-19
Dual Time Mode
You can use the Dual Time Mode to set a second time that is different from the
Timekeeping Mode time.
To enter the Dual Time Mode
Use C to select the Dual Time Mode as shown on page E-9.
To set the Dual Time
1. In the Dual Time Mode, hold down B for at least two
seconds until the hour starts to flash. This is the setting
mode.
2. Press B to move the flashing between the hour and
minute settings.
Hour
E-18
To perform an elapsed time operation
BBBBB(Two seconds)
Start Stop (Restart) (Stop) Reset
Note
x The Stopwatch Mode can indicate elapsed time up to 23hours, 59minutes,
59seconds.
x After the elapsed time reaches one hour, the display units change to hours,
minutes, and seconds, and time is measured in one-second increments.
E-17
Using the Stopwatch
The stopwatch measures elapsed time.
To enter the Stopwatch Mode
Use C to select the Stopwatch Mode as shown on page
E-9.
Minutes Seconds
1/100 Seconds
E-16
4. Press B to exit the setting mode.
To test the alarm
In any mode, hold down C to sound the alarm.
To turn an alarm on and off
In the Alarm Mode, each press of B toggles between on and off.
Alarm on Alarm off
To stop the alarm
Press any button.
E-15
Using the Alarm
When an alarm is turned on, the alarm tone will sound when its alarm time is reached.
To enter the Alarm Mode
Use C to select the Alarm Mode as shown on page E-9.
To set an alarm time
1. In the Alarm Mode, hold down B for at least two
seconds until the hour starts to flash. This is the setting
mode.
2. Press B to move the flashing between the hour and
minute settings.
3. While a setting is flashing, use C to change it.
x When setting the alarm time using the 12-hour
format, take care to set the time correctly as a.m. (no
indicator) or p.m. (P indicator).
Hour
E-14
3. When the timekeeping setting you want to change is flashing, use C to change it
as described below.
Screen To do this:
Reset the second to 00
Change the hour or minute
Toggle between 12-hour (12H) and 24-hour (24H) timekeeping
4. Press B to exit the setting mode.
Note
x While 12-hour format is selected for timekeeping, a P indicator will appear for
times from noon to 11:59 p.m. No indicator appears for times from midnight to
11:59 a.m. With 24-hour format, time is displayed from 0:00 to 23:59, without any
P indicator.
E-13
Adjusting the Digital Time Setting
Use the procedure below to adjust the digital time setting.
To configure the digital time setting
1. In the Timekeeping Mode, hold down B for at least
two seconds until the second start to flash. This is the
setting mode.
2. Press B to move the flashing in the sequence shown
below to select the other settings.
BBBB
Timekeeping Mode
Second12/24-Hour Format
B (two seconds)
Hour
Minute
Second
E-12
To configure the date setting
1. In the Calendar Mode, hold down B for at least two
seconds until the year start to flash. This is the setting
mode.
2. Press B to move the flashing in the sequence shown
below to select the other settings.
BBB
Calendar Mode
Year
B (two seconds)
MonthDay
3. When the date setting you want to change is flashing, use C to change it.
4. Press B to exit the setting mode.
Year
E-11
Adjusting the Date Setting
Use the procedure below to adjust the date setting.
Note
x You can specify a date in the range of January 1, 2000 to December 31, 2099.
x The watch’s built-in full automatic calendar makes allowances for different month
lengths and leap years. Once you set the date, there should be no reason to
change it except after you have the watch’s battery replaced.
x The day of the week changes automatically when the date changes.
E-10
General Functions (All Modes)
The functions and operations described in this section can be used in all of the
modes.
Auto Return Features
If you leave a setting mode with flashing digits on the display for two or three minutes
without performing any operation, the watch exits the setting mode automatically.
Scrolling
The C button is used on the setting mode to scroll through data on the display. In
most cases, holding down this button during a scroll operation scrolls through the
data at high speed.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio AW-500E - QW-5416 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio AW-500E - QW-5416 in the language / languages: English as an attachment in your email.

The manual is 0.12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info