27173
40
Zoom out
Zoom in
Previous page
1/44
Next page
A-6
Byte 1 Byte 2 Byte 3
BnH 78H 00H
n ....... Voice Channel Number = 0H to FH (Ch1 to Ch16)
Recognition
Receipt of this message immediately mutes all tones play-
ing over the MIDI channels.
Reset All Controller
Format
Byte 1 Byte 2 Byte 3
BnH 79H 00H
n ....... Voice Channel Number = 0H to FH (Ch1 to Ch16)
Recognition
Receipt of the Reset All Controller message causes the
following controllers to be reset.
Controller Name Reset Value
Modulation Wheel vvH = 00H
Expression Controller vvH = 7FH
Hold 1 vvH = 00H
Portamento vvH = 00H
Sostenuto vvH = 00H
Soft vvH = 00H
NRPN msb = 7FH, lsb = 7FH
RPN msb = 7FH, lsb = 7FH
Pitch Bend Change llH mmH = 00H 40H
Byte 1 Byte 2
CnH ppH
pp .... Program Number = 00H to 7FH
Send
Program Change messages are sent when you select a
tone on the instrument.
Byte 1 Byte 2 Byte 3
EnH llH mmH
n ....... Voice Channel Number = 0H to FH (Ch1 to Ch16)
ll....... Pitch Bend Change LSB = 00H to 7FH
mm .. Pitch Bend Change MSB = 00H to 7FH
Recognition
The value llH mmH is 00H 00H at the lowest pitch,
00H 40H at mid-pitch, and 7FH 7FH at the highest pitch.
You have to set both the LSB and MSB together to form
a 14-bit value and make a Pitch Bend Change message
recognized by the instrument.
Channel Mode Message
All Sound Off
Format
427B-E-070B
Pitch Bend Sensitivity
RPN MSB = 00H
RPN LSB = 00H
Data Entry MSB = mmH
mm .. Pitch Bend Sensitivity = 00H to 18H (0 to 24 semi-
tones)
Recognition
The data entry LSB is always ignored.
Master Fine Tuning
RPN MSB = 00H
RPN LSB = 01H
Data Entry MSB = mmH
Data Entry LSB = llH
mm ll .... Master Fine Tuning = 00 00H to 40H 00H to 7FH
7FH (-100 to 0 to +99.99 cents)
Master Coarse Tuning
RPN MSB = 00H
RPN LSB = 02H
Data Entry MSB = mmH
mm .. Master Coarse Tuning = 28H to 40H to 58H (-24 to
0 to +24 semitones)
Recognition
The data entry LSB is always ignored.
RPN Null
RPN MSB = 7FH
RPN LSB = 7FH
Recognition
Once an RPN Null is sent, all received data entry MSBs
and LSBs are ignored until another RPN message other
than RPN Null or an NRPN message is received.
Program Change
Format
Pitch Bend Change
Format
AP31/33_E_MIDI Data.p65 03.2.18, 9:57Page 6 Adobe PageMaker 6.5J/PPC
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio AP33 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio AP33 in the language / languages: Dutch as an attachment in your email.

The manual is 1,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio AP33

Casio AP33 User Manual - English - 50 pages

Casio AP33 User Manual - German - 48 pages

Casio AP33 User Manual - Spanish - 50 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info