624813
2
Zoom out
Zoom in
Previous page
1/6
Next page
Operation Guide 5475
E-10
General Functions (All Modes)
The functions and operations described in this section can be used in all of the modes.
Direct Timekeeping Mode Access
To enter the Timekeeping Mode from any other mode, hold down
C
for about two
seconds.
Auto Return Features
The watch will automatically return to the Timekeeping Mode if you do not perform
any button operation for a particular amount of time in each mode.
Mode Name Approximate Elapsed Time
Alarm 3 minutes
Setting screen (digital setting fl ashing) 3 minutes
Initial Screens
When you enter the Alarm or World Time Mode, the data you were viewing when you
last exited the mode appears fi rst.
E-11
Scrolling
The
D
and
B
buttons are used on the setting screen to scroll through data on the
display. In most cases, holding down these buttons during a scroll operation scrolls
through the data at high speed.
Digital Meter
The digital meter indicates the seconds count in the Timekeeping Mode (page
E-12), World Time Mode (page E-24), and Timer Mode (page E-32). In the
Stopwatch Mode (page E-29) it indicates the 1/10-second count.
Digital MeterDigital Meter
E-12
Timekeeping
Use the Timekeeping Mode to set and view the current time and date.
Day of week
Month Day
Hour hand
Second hand
Digital meter Minute hand
Mode dial hand
E-13
Each press of
A
in the Timekeeping Mode will change screen contents as shown
below.
PM indicator
Month-Day
Hour : Minutes Seconds
E-14
Confi guring Home City Settings
There are two Home City settings: actually selecting the Home City and selecting
either standard time or daylight saving time (DST).
To confi gure Home City settings
1. In the Timekeeping Mode, hold down
A
until
ADJ
appears in the lower display.
When you release
A
(after ADJ appears), SET will
be fl ashing in the upper display. This is the setting
mode.
The watch will exit the setting mode automatically if
you do not perform any operation for about two or
three minutes.
2. Use
D
(East) and
B
(West) to scroll through the
available city codes.
For details about city codes, see the “City Code
Table” at the back of this manual.
City codeCity code
E-15
3. Press
C
.
This will cause DST to appear in the upper display
and the DST setting of the currently selected Home
City to appear in the lower display.
4. Press
D
to toggle the DST setting between daylight
saving time (
ON
) and standard time (
OFF
).
Note that you cannot switch between standard
time and daylight saving time (DST) while UTC is
selected as your Home City.
5. After all of the settings are the way you want, press
A
to exit the setting screen.
The DST indicator appears to indicate that daylight saving time is turned on.
Note
After you specify a city code, the watch will use UTC* offsets in the World Time
Mode to calculate the current time for other time zones based on the current
time in your Home City.
* Coordinated Universal Time, the world-wide scientifi c standard of timekeeping.
The reference point for UTC is Greenwich, England.
DST indicatorDST indicator
E-16
To change the daylight saving time (summer time) setting
1. In the Timekeeping Mode, hold down
A
until
ADJ
appears in the lower display.
When you release
A
(after ADJ appears), SET will
be fl ashing in the upper display.
2. Press
C
.
This will cause DST to appear in the upper display
and the DST setting of the currently selected Home
City to appear in the lower display.
3. Press
D
to toggle the DST setting between daylight saving time (
ON
) and standard
time (
OFF
).
4. After all of the settings are the way you want, press
A
to exit the setting screen.
The DST indicator appears to indicate that daylight saving time is turned on.
E-17
Confi guring Current Time and Date Settings
You can use the procedure below to adjust the Timekeeping Mode time and date
settings if they are off.
Changing the digital Home City data should cause the analog time setting to change
accordingly. If the analog time does not indicate the digital time, check the home
positions of the hands and make adjustments if necessary (page E-21).
To change the current time and date settings
1. In the Timekeeping Mode, hold down
A
until
ADJ
appears in the lower display.
When you release
A
(after
ADJ
appears),
SET
will
be fl ashing in the upper display.
City CodeCity Code
E-18
2. Press
C
to move the fl ashing in the sequence shown below to select the other
settings.
City Code
(page E-14)
DST
(page E-16)
Illumination
Duration
(page E-40)
Button Operation
Tone On/Off
(page E-44)
Day Month
12/24-Hour
Format
Seconds Hour
Year
Minutes
E-19
3. When the timekeeping setting you want to change is fl ashing, use
D
and/or
B
to
change it as described below.
Screen To do this: Do this:
Change the city code See page E-14.
Toggle between daylight saving time (
ON
)
and standard time (
OFF
).
See page E-14.
Toggle between 12-hour (
12H
) and 24-hour
(
24H
) timekeeping.
Press
D
.
Reset the seconds to
00
(If the current seconds count is between 30
and 59, one is added to the minute count).
Press
D
.
Change the hour or minutes
Use
D
(+) and
B
(–).
Change the year, month, or day
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio 5475 - GST-210 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio 5475 - GST-210 in the language / languages: English as an attachment in your email.

The manual is 0,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio 5475 - GST-210

Casio 5475 - GST-210 User Manual - German - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info