Measurements: Elapsed time; split time; two fi nishes
Battery: One silver oxide battery (Type: SR927SW)
Battery Life:Approximately 5years (2hours stopwatch operation per day)
Low Battery Indicator: Second hand moves in 2-second increments when power is low.
Stopwatch functions
Crown Operations
Some water-resistant models (100meters, 200meters)
have a screw-in crown. When you need to perform a crown
operation, rotate it towards you to unscrew it. Then pull
the crown out. Avoid applying undue force when pulling.
The watch loses its water resistance while the crown is
unscrewed. After performing a crown operation, fully screw
the crown back in.
Crown
Loosen
If your watch has a rotary bezel...
You can rotate the bezel to align its
▼
mark with the
minute hand. Then you will be able to tell how much
time has elapsed since aligning the
▼
mark.
Start
Elapsed time
Current
xYour watch may differ somewhat from the one shown in the illustration.
xSome models may use a combination of hands and rotating disks to indicate
information. The word “hand” in this section is used to mean both analog hands
and rotating disks.
Using the Stopwatch
Elapsed time
A
A
AA
B
StartStopRe-startStopReset
Split time
A
B
BA
B
StartSplitSplit releaseStopReset
Two fi nishes
A
B
AB
B
StartSplit
First runner
fi nishes.
Display time of fi rst
runner.
Stop
Second runner
fi nishes.
Split release
Display time of
second runner.
Reset
Important!
x
Do not operate the stopwatch with the crown pulled out.
Note
x
The Stopwatch 1/5-Second Hand and Stopwatch Minute Hand move for the fi rst
12hours of an elapsed time measurement. After that, they stop at 0 and they are
reset.
The stopwatch measures elapsed time in 1/5 (0.2)-second increments up to
59minutes, 59.8seconds.
Perform the following procedure if the stopwatch hands do not return to their 0 (zero)
positions when you reset the stopwatch.
Correcting the 0 Positions of the Hands
Pull the Crown out to Click 2.
Hold down A for about two seconds.
xThe
Stopwatch Minute Hand
will perform one full rotation to indicate the minute
hand setting mode.
xIf the hand does not align with 12o’clock, use the B button to adjust it.
xHolding down B moves the current hand at high speed.
Hold down A for about two seconds.
xThe
Stopwatch 1/5-second Hand
will perform one full rotation to indicate the
second hand setting mode.
xIf the hand does not align with 12o’clock, use the B button to adjust it.
xHolding down B moves the current hand at high speed.
After all of the hands are the way you want, push the Crown back in.
Important!
x
Timekeeping stops while the crown is pulled out. Correct the current time setting
after performing the above operation.
Second Hand
24-hour Hand
Day Indicator
Click 2
Click 1
Hour HandMinute Hand
A
B
Stopwatch 1/5-Second Hand
Stopwatch Minute Hand
Crown
Need help? Post your question in this forum.
Report abuse
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Casio 5363 - GAC-110 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Casio 5363 - GAC-110 in the language / languages: English as an attachment in your email.
The manual is 0,08 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
