624958

Casio 5288 - BGA-160 Manual

2
Zoom out
Zoom in
Previous page
1/5
Next page
Operation Guide 5288
E-19
When the timekeeping setting you want to change is fl ashing, use 3. D and/or B
to change it as described below.
Screen To do this: Do this:
Reset the seconds to 00
Press D.
Toggle between Daylight Saving Time (ON)
and Standard Time (OFF)
Press D.
Change the city code
Use D (East) and B (West).
Change the hour or minute
Use D (+) and B (–).
Toggle between 12-hour (12H) and 24-hour
(24H) timekeeping
Press D.
Change the year, month, or day
Use D (+) and B (–).
Press 4. A to exit the setting mode.
E-18
Press 2. C to move the fl ashing in the sequence shown below to select the other
settings.
Seconds
C
DST
C
Home City Code
C
Hour
C
Minutes
C
C
Illumination Duration
C
Day
C
Month
C
Year
C
12/24-Hour Format
The following steps explain how to confi gure timekeeping settings only. x
E-17
Adjusting the Digital Time and Date Settings
Use the procedure below to adjust the digital time and date settings.
Note
After adjusting the digital time and date setting, be sure to adjust the analog hands
x
so the settings match.
See “Adjusting the Analog Hand Setting” (page E-36). x
To confi gure the digital time and date settings
In the Timekeeping Mode, hold down 1. A for about two
seconds until the seconds start to fl ash. This is the
setting mode.
Seconds
E-16
To change the Daylight Saving Time (summer time) setting
In the Timekeeping Mode, hold down 1. A for about two
seconds until the seconds start to fl ash. This is the
setting mode.
Press 2. C to display the DST setting mode.
Press 3. D to toggle between Daylight Saving Time (On)
and Standard Time (OFF).
After the setting is the way you want, press 4. A to
return to the Timekeeping Mode.
The
x DST indicator appears to indicate that Daylight
Saving Time is turned on.
DST indicator
E-15
Press 3. D (East) and B (West) to select the city code
you want to use as your Home City.
Keep pressing
x D or B until the city code you want
to select as your Home City appears on the display.
After the setting is the way you want, press 4. A to
return to the Timekeeping Mode.
Note
After you specify a city code, the watch will use UTC*
x
offsets in the World Time Mode to calculate the current
time for other time zones based on the current time in
your Home City.
Coordinated Universal Time, the world-wide scientifi c
*
standard of timekeeping.
The reference point for UTC is Greenwich, England.
City Code
E-14
Confi guring Home City Settings
There are two Home City settings: actually selecting the Home City, and selecting
either standard time or daylight saving time (DST).
To confi gure Home City settings
In the Timekeeping Mode, hold down 1. A for about two
seconds until the seconds start to fl ash. This is the
setting mode.
The watch will exit the setting mode automatically if
x
you do not perform any operation for about two or
three minutes.
Press 2. C twice to move the fl ashing to the city code.
For details about city codes, see the “City Code
x
Table” at the back of this manual.
Seconds
E-13
Timekeeping
Use the Timekeeping Mode to set and view the current
time and date.
Each press of
x D cycles the digital display contents as
shown below.
Day of the Week Month-Day Hour : Minutes Seconds
D D D
PM indicator
D
Hour
Day of week
Minutes
E-12
General Functions (All Modes)
The functions and operations described in this section can be used in all of the
modes.
Auto Return Features
The watch returns to the Timekeeping Mode automatically if you do not perform
x
any button operation for two or three minutes in the Alarm Mode.
If you leave a setting mode with fl ashing digits on the display for two or three x
minutes without performing any operation, the watch exits the setting mode
automatically.
Initial Screens
When you enter the World Time Mode or Alarm Mode, the data you were viewing
when you last exited the mode appears fi rst.
Scrolling
The B and D buttons are used on the setting mode to scroll through data on the
display. In most cases, holding down these buttons during a scroll operation scrolls
through the data at high speed.
E-11
Hand Setting Mode
C
Stopwatch Mode Alarm Mode
C C
E-10
Selecting a Mode
Press
x C to cycle between the modes as shown below.
In any mode (except when a setting mode, with fl ashing digits is on the display), x
press B to illuminate the display.
Timekeeping Mode
C
World Time Mode Countdown Timer Mode
C C
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio 5288 - BGA-160 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio 5288 - BGA-160 in the language / languages: English as an attachment in your email.

The manual is 0,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio 5288 - BGA-160

Casio 5288 - BGA-160 User Manual - German - 5 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info