445420
2
Zoom out
Zoom in
Previous page
1/3
Next page
Operation Guide 5069
2
To start an elapsed time operation while in the Timekeeping Mode
1. In the Timekeeping Mode, press B to start elapsed time measurement.
After you press B in the Timekeeping Mode, elapsed time measurement will not
start for about one second.
The elapsed time measurement will not start if you press B in the Timekeeping
Mode while either of the following conditions exists.
While an alarm is sounding
While the watch is changing from one date to the next (at midnight)
2. Press B to stop elapsed time measurement.
You can restart and stop elapsed time measurement as many times as you like by
pressing B.
The bottom dial hand indicates 1/20 seconds during the first 60 seconds only, and
then stops. When elapsed time measurement is stopped (by pressing B), the
bottom dial hand will jump to the 1/20 second indication (which is kept internally).
3. Check the elapsed time.
After you are finished measuring elapsed time, press D to reset the stopwatch. The
stopwatch will stop and reset even if you press D while elapsed time measurement
is in progress.
To return to regular timekeeping, press D while the stopwatch is reset.
World Time
The World Time Mode shows you the current time in 29
cities (29 time zones) around the world. A simple
operation swaps your Home City with the currently
selected World Time City.
When you enter the World Time Mode, the indicator
hand will move automatically to the city code that is
currently selected as the World Time City code. At the
same time, the right dial hands will move to the current
time in that city.
If the current time shown for a city is wrong, check your
Home City settings and make the necessary changes.
All of the operations in this section are performed in the
World Time Mode.
30
World Time
(24-hour format)
Bottom
dial
City code
Indicator hand
To view the time in another city
In the World Time Mode, use D to move the indicator hand clockwise to the city code
of the city you want to select as the World Time City.
The right dial hands will move to indicate the current time in the selected city code.
The day display will continue to indicate the day in your Home City.
For full information on city codes, see the “City Code Table”.
To check whether the time for the selected city code is Standard Time or
Daylight Saving Time
1. In the World Time Mode, use D to select the city code that you want to check.
2. Press A.
The bottom dial hand will move to OFF in the case of Standard Time, and to ON in
the case of Daylight Saving Time.
If you do not perform any operation for about three seconds, the watch will return
automatically to regular timekeeping.
To toggle a city code time between Standard Time and Daylight Saving Time
1. In the World Time Mode, use D to move the indicator
hand to the city code whose Standard Time/Daylight
Saving Time setting you want to change.
2. Hold down A for about three seconds until the watch
beeps. This will cause the bottom dial to toggle between
ON (Daylight Saving Time) and OFF (Standard Time).
Note that you cannot switch between Standard Time and
Daylight Saving Time while UTC is selected as the city
code.
Note that the Standard Time/Daylight Saving Time
setting affects only the currently displayed city code.
Other city codes are not affected.
30
Hold down
A for three
seconds.
Swapping your Home City and World Time City
You can use the procedure below to swap your Home City and World Time City. This
changes your Home City to your World Time City, and your World Time City to your
Home City. This capability can come in handy when you frequently travel between two
cities in different time zones.
To swap your Home City and World Time City
1. In the World Time Mode, use D to move the indicator hand to the World Time City
you want.
2. Hold down B for about three seconds until the watch beeps.
This will make the World Time City (which you selected in step 1) your Home City. At
the same time, it changes the Home City you had selected prior to step 2 your World
Time City.
After swapping the Home City and World Time City, the watch will stay in the World
Time Mode with the city that was selected as the Home City prior to step 2 now
displayed as the World Time City.
Alarm
When the alarm is turned on, the alarm sounds when the
alarm time is reached.
Whenever you enter the Alarm Mode, the indicator hand
will move to the ALM position. The bottom dial will move
to the alarm’s current ON/OFF status.
All of the operations in this section are performed in the
Alarm Mode.
To set an alarm time
1. In the Alarm Mode, hold down A for about three
seconds until the watch beeps. This indicates it is in the
setting mode.
The bottom dial will move to ON (alarm on) at this
time.
3
0
Mode indicator
Alarm time hour
(24-hour format)
Alarm time minute
Bottom dial
2. Use D (+) and B (–) to change the alarm time setting in the right dial.
Each press of either button changes the setting by one minute.
3. After setting the alarm time, press A to exit the setting mode.
Setting the alarm time causes the alarm to turn on automatically.
Alarm Operation
The alarm tone sounds at the alarm time for 10 seconds, regardless of the mode the
watch is in.
Alarm operations are performed in accordance with the Timekeeping Mode time.
Pressing any button stops the alarm tone operation.
To toggle an alarm on and off
In the Alarm Mode, press A to toggle the alarm setting indicated by the bottom dial
hand ON or OFF.
Adjusting the Home Positions
If you notice that the watch hands are not indicating 12 o’clock, ON/OFF settings, or
other indicator settings correctly, you can adjust the “home positions” of the hands
manually to correct them.
To adjust the home positions
1. In the Timekeeping Mode, as you hold down A, hold
down C for about three seconds until the watch beeps.
This indicates that the watch is in the home position
adjustment mode.
If the bottom dial hand moves to 12 o’clock, it is in the
correct home position. If it doesn’t, use D to move
the bottom dial hand to 12 o’clock.
The indicator hand is also in the proper home position
if it moves to 12 o’clock. If it doesn’t, press B to
move it to 12 o’clock.
30
Indicator hand
Bottom dial hand
Correct bottom dial hand and
indicator hand home positions
2. After confirming that the bottom dial hand and indicator
hand are both at the proper home positions, press C.
This will switch to hour hand and minute hand home
position adjustment.
The hour hand and minute hand are at their proper
home positions if they both move to 12 o’clock, and if
the left dial hand is pointing at 24. If the hands are not
positioned correctly, use D (+) and B (–) to move all
three hands to their proper home positions.
The left dial hand moves in accordance with the hour,
minute, and second settings. As you set the time, take
care to ensure that the left dial hand also is at the
correct position.
3. After confirming that the hands are in the correct home
positions, press C. This will advance to right dial hands
home position adjustment.
3
0
Hour hand
Left dial hand
Correct hour and minute
hand home positions
If the right dial hands (hour, minute) both point at 24, it
means that they are at their proper home positions. If
they aren’t, use D (+) and B (–) to move the hands
until they point at 24.
4. After confirming that the right dial hands are in the
correct home positions, press C. This will advance to
day home position adjustment.
The day is in the correct home position if it shows “1”.
If it doesn’t, use D (+) and B (–) to change the day
to “1”.
5. To return to regular timekeeping, press A.
3
0
1
1
Day
Right dial hands
Correct right dial hands
home positions
Correct day home position
Reference
This section contains more detailed and technical information about watch operation.
It also contains important precautions and notes about the various features and
functions of this watch.
Auto Return Features
If you leave the watch in the Alarm Mode for two or three minutes without performing
any operation, it will return to regular timekeeping automatically.
If you do not perform any operation for about two or three minutes while a setting
mode is selected, the watch will exit the setting mode automatically.
High-Speed Movement
The D and B buttons are used to change the hand setting in various setting
modes. In most cases, holding down these buttons will start high-speed movement
of the applicable hand(s) and day.
High-speed movement of the hands and day will continue until you press any button,
or until the moving hand(s) and day finish one complete cycle.
One complete cycle for the hands is 24 hours.
One complete cycle for the day is 31 days.
Timekeeping
The date will change automatically when the current time reaches midnight. The
date change at the end of the month may take more time than normal.
The current time for all city codes in the Timekeeping Mode is calculated in
accordance with Universal Time Coordinated (UTC*) data of each city, based on
your Home City time setting.
* UTC is the world-wide scientific standard of timekeeping. It is based upon
carefully maintained atomic (cesium) clocks that keep time accurately to within
microseconds. Leap seconds are added or subtracted as necessary to keep UTC
in sync with the Earth’s rotation. The reference point for UTC is Greenwich,
England.
Minute hand
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio 5069 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio 5069 in the language / languages: English as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio 5069

Casio 5069 User Manual - German - 3 pages

Casio 5069 User Manual - Dutch - 3 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info