586710
2
Zoom out
Zoom in
Previous page
1/2
Next page
Operation Guide 3284
E-15
Specifi cations
Accuracy at normal temperature: ±30 seconds a month
Timekeeping: Hour, minutes, seconds, p.m., day, and day of the week
Time system: Switchable between 12-hour and 24-hour formats
Calendar system: Auto-calendar set at 28 days for February
Alarm: Daily alarm, Hourly time signal
Stopwatch
Measuring units: 1/100 seconds
Measuring capacity: 59 minutes, 59.99 seconds
Measuring modes: Elapsed time, split time, and two fi nishes
Illumination: LED (light-emitting diode)
Battery: One lithium battery
Type: CR1616
Battery life: Approx. 5 years
x 1 second of illumination operation per day
x 20 seconds of alarm operation per day
E-14
While the second’s digits are selected (fl ashing), press 3. A to reset the seconds to
. If you press A while the second’s count is in the range of 30 to 59, the seconds
are reset to
and 1 is added to the minutes. If the second’s count is in the range of
00 to 29, the minute’s count is unchanged.
While any other digits (besides seconds) are selected (fl ashing), press 4. A to
increase the number. While the day of the week is selected, pressing A advances
to the next day. Holding down A changes the current selection at high speed.
After you set the time and date, press 5. B to return to the Timekeeping Mode.
If you do not operate any button for one or two minutes while a selection is fl ashing, x
the fl ashing stops and the watch goes back to the Timekeeping Mode automatically.
E-13
Time Setting
Use the Time Setting Mode to set the current time and
date.
To set the time and date
Use 1. B to enter the Time Setting Mode (page E-5).
The second’s digits fl ash because they are selected. x
Press 2. C to change the selection in the following
sequence.
Minutes
Seconds
Month
Hour
Day
Day of
the Week
PM indicator
Day of week
Day
Hour : Minutes Seconds
E-12
To measure times with the stopwatch
(a) Elapsed time measurement
A A A A C
Start Stop Re-start Stop Clear
(b) Split time measurement
A C C A C
Start Split
(SPL displayed)
Split release Stop Clear
(c) Split time and 1st-2nd place times
A C A C C
Start Split
First runner
nishes.
Display time of
rst runner.
Stop
Second runner
nishes.
Split release
Display time of
second runner.
Clear
E-11
Stopwatch
The Stopwatch Mode lets you measure elapsed time, split
times, and two fi nishes. The range of the stopwatch is
59 minutes, 59.99 seconds.
The stopwatch continues to run, restarting from zero after x
it reaches its limit, until you stop it.
The stopwatch measurement operation continues even if x
you exit the Stopwatch Mode.
Exiting the Stopwatch Mode while a split time is frozen x
on the display clears the split time and returns to elapsed
time measurement.
All of the operations in this section are performed in the x
Stopwatch Mode, which you enter by pressing B (page
E-5).
Mode indicator
Minutes
1/100 second
Seconds
E-10
To stop the alarm
Press any button to stop the alarm after it starts to sound.
To switch the Daily Alarm and Hourly Time Signal on and off
Press A while in the Alarm Mode to change the status of the Daily Alarm and Hourly
Time Signal in the following sequence.
Both on Both off Daily Alarm only Hourly Time
Signal only
To test the alarm
Hold down A while in the Alarm Mode to sound the alarm.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio 3284 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio 3284 in the language / languages: English as an attachment in your email.

The manual is 0,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio 3284

Casio 3284 User Manual - German - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info