466615

Casio 3139 Manual

4
Zoom out
Zoom in
Previous page
1/5
Next page
Operation Guide 3139
4
Alarm Operation
The alarm sounds at the preset time for about 10 seconds (in all modes), or until you
stop it by pressing any button.
To test the alarm
In the Alarm Mode, hold down
D
to sound the alarm.
To turn the daily alarm and the Hourly Time Signal on and off
In the Alarm Mode, press
D
to cycle through the settings shown below.
Alarm Off
Signal On
Alarm On
Signal Off
Alarm Off
Signal Off
Alarm On
Signal On
Alarm On Indicator / Hourly Time Signal On Indicator
•
The alarm on indicator and the Hourly Time Signal on indicator are shown on the
display in all modes while these functions are turned on.
Daylight Saving Time (DST)
Daylight Saving Time (summer time) advances the time setting by one hour from
Standard Time. Remember that not all countries or even local areas use Daylight
Saving Time.
The time calibration signals transmitted from Mainfl ingen (Germany), Anthorn
(England), or Fort Collins (the United States) includes both Standard Time and DST
data. When the Auto DST setting is turned on, the watch switches between Standard
Time and DST (summer time) automatically in accordance with the received time
signal.
The time calibration signals transmitted from Fukushima and Fukuoka/Saga (Japan)
do not include summer time data.
•
The default DST setting is Auto DST (
) whenever you select ANC, YVR,
LAX, YEA, DEN, MEX, YWG, CHI, MIA, YTO, NYC, YHZ, YYT, LIS, LON, MAD,
PAR, ROM, BER, STO, ATH, MOW, HKG, BJS, TPE, SEL, or TYO as your Home
City code.
•
If you experience problems receiving the time calibration signal in your area, it
probably is best to switch between Standard Time and Daylight Saving Time (summer
time) manually.
To change the Daylight Saving Time (summer time) setting
1. In the Timekeeping Mode, hold down
A
until the city code starts to fl ash, which
indicates the setting screen.
2. Press
C
and the DST setting screen appears.
3. Use
D
to cycle through the DST settings in the sequence shown below.
Auto DST
()
DST on
()
DST off
()
4. When the setting you want is selected, press
A
to exit the setting screen.
•
The DST indicator appears to indicate that Daylight Saving Time is turned on.
Timekeeping
Use the Timekeeping Mode to set and view the current time and date.
•
When setting the time, you can also confi gure settings for the City Code, the DST
setting, the 12/24-Hour Format, Year, Month, Day, the Language setting, and the
Month/Day display format.
•
Pressing
D
in the Timekeeping Mode will display the Last Signal screen.
Current Time and Date Screen Last Signal Screen
Press .
Dayofweek
Home Time
(Hour : Minutes Seconds)
Month – Day
Receive time
Receive date
Year
PM indicator
DST indicator
Note
•
This watch is capable of displaying text for the day of the week in any one of
nine different languages (English, Spanish, French, Portuguese, German, Italian,
Chinese, Russian, and Japanese).
Setting the Time and Date
Make sure you select your Home City code before you change the current time
and date settings. World Time Mode times are all displayed in accordance with the
Timekeeping Mode settings. Because of this, World Time Mode times will not be
correct if you do not select the proper Home City code before setting the time and
date in the Timekeeping Mode.
To set the time and date
City code
1. In the Timekeeping Mode, hold down
A
until the city
code starts to fl ash, which indicates the setting screen.
2. Press
C
to change the fl ashing contents in the
sequence shown below to select other settings.
DST
City
Code
Seconds
12/24-Hour
Format
Minutes
Day
Month/Day
Display Format
Month
Language
Yea r
Hour
3. When the setting you want to change is fl ashing, use
B
and/or
D
to change it as
described below.
Screen: To do this: Do this:
Change the city code Use
D
(east) and
B
(west).
Cycle between auto DST ( ),
Standard Time ( ), and Daylight
Saving Time ( )
Press
D
.
Toggle between 12-hour (
12H
) and
24-hour (
24H
) timekeeping
Press
D
.
Reset the seconds to Press
D
.
Change the hour, minutes, or year
Use
D
(+) and
B
(–).
Change the month or day
Change the language
ENG
:
English
ESP
:
Spanish
FRA
:
French
POR
: Portuguese
DEU
: German
ITA
: Italian
CHN
: Chinese
:
Russian
JPN
:
Japanese
Use
D
and
B
.
Toggle the month/day display format
between
month/day (M/D) and day/month (D/M).
Press
D
.
•
See the “City Code Table” at the back of this manual for a complete list of
available city codes.
•
See the “Day of the Week List” at the back of this manual for information on
abbreviations used.
•
Auto DST (
) can be selected only while HNL, ANC, YVR, LAX, YEA,
DEN, MEX, YWG, CHI, MIA, YTO, NYC, YHZ, YYT, LIS, LON, MAD, PAR, ROM,
BER, STO, ATH, MOW, HKG, BJS, TPE, SEL, or TYO is selected as the Home
City code. For more information, see “Daylight Saving Time (DST)” below.
4. Press
A
to exit the setting screen.
Reference
This section contains more detailed and technical information about watch operation.
It also contains important precautions and notes about the various features and
functions of this watch.
Auto Display
Auto Display continually changes the contents of the digital display.
To turn off Auto Display
Press any button to turn off Auto Display. This returns to the Timekeeping Mode.
To turn on Auto Display
In the Timekeeping Mode, while holding down
B
, hold down
D
for about two
seconds until the watch beeps.
Note
•
Calibration signal reception is disabled while Auto Display is being performed.
•
Auto Display cannot be performed while a setting screen is on the display.
Button Operation Tone
MUTE indicator
The button operation tone sounds any time you press one
of the watch’s buttons. You can turn the button operation
tone on or off as desired.
•
Even if you turn off the button operation tone, the alarm,
Hourly Time Signal, and Countdown Timer Mode alarm
all operate normally.
To turn the button operation tone on and off
In any mode (except when a setting screen is on the
display), hold down
C
to toggle the button operation tone
on (MUTE not displayed) and off (MUTE displayed).
•
Since the
C
button is also the mode change button, holding it down to turn the
button operation tone on or off also causes the watch’s current mode to change.
•
The MUTE indicator is displayed in all modes when the button operation tone is
turned off.
Auto Return Features
•
If you leave the watch with the Last Signal screen in the Timekeeping Mode for one
or two minutes without performing any operation, it returns to the Current Time and
Date screen in the Timekeeping Mode automatically.
•
If you leave the watch in the Alarm Mode for two or three minutes without performing
any operation, it returns to the Timekeeping Mode automatically.
•
If you leave the watch with a fl ashing setting on the display for two or three minutes
without performing any operation, the watch exits the setting screen automatically.
Scrolling
The
B
and
D
buttons are used in various modes and setting screens to scroll
through data. In most cases, holding down these buttons during a scroll operation
scrolls through the data at high speed.
Initial Screens
When you enter the World Time or Alarm Mode, the data you were viewing when you
last exited the mode appears fi rst.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio 3139 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio 3139 in the language / languages: English as an attachment in your email.

The manual is 0,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio 3139

Casio 3139 User Manual - German - 5 pages

Casio 3139 User Manual - Dutch - 5 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info