534449
6
Zoom out
Zoom in
Previous page
1/8
Next page
2220-6
IR MODE
Use the IR Mode to exchange data between two watches or between your
watch and computer.
Note
An infrared adapter (PAD-2) is required to exchange data with a computer.
For details about the procedure for exchanging data with a computer, see
the documentation contained on the CD-ROM that comes with the PAD-2
infrared adapter.
Exchanging Data Between Two Watches
To exchange data between two watches, orient the watches as shown below.
The above 10cm (4 inches) and 30-degree maximums shown in the above
illustration apply only when the watches are pointed straight at each other.
The maximum allowable distance may be less if either watch is at an angle
(not pointed straight).
Proper data communication may also be impossible if the two watches are
too close to each other.
To enter the IR Mode
In the Timekeeping Mode, press D five times to enter the IR Mode. An initial
screen appears for about one second, followed by the COM (IR Mode) menu.
If you leave the watch in the IR Mode for about two minutes without performing
any operation, it automatically changes to the Timekeeping Mode.
STOPWATCH MODE
The Stopwatch Mode lets you measure
elapsed time, split times, and two finishes. The
range of the stopwatch is 23 hours, 59
minutes, 59.99 seconds.
To measure times with the stopwatch
Elapsed Time
Split Time
Two Finishes
Note
The elapsed time measurement operation continues even if you exit the
Stopwatch Mode.
STW
‰H
'
00
Hours
Minutes
Seconds
1/100 second
IR port
30 degrees
maximum
10cm (4 inches) maximum
IR
COM
COM
PC
OTHERS
Initial screen COM menu
Start Stop Re-start Stop Clear
Split releaseStart Split Stop Clear
Start Split
First runner
finishes.
Stop
Second runner finishes.
Record time of first
runner.
Split release
Record time of
second runner.
Clear
EE E E B
EB B E B
EB E B B
COM
PC
OTHERS
OTHERS
SEND
RECEIVE
SEND
OTHERS
SEND
Pointer
To send a single image
1. On the COM menu, press E to move the
pointer to OTHERS.
2. Press F to display the OTHERS menu,
with the pointer located next to SEND.
3. Press F again to display the image
selection screen.
4. Use E (+) and B () to scroll through the
images and display the one you want to
send.
Holding down either button scrolls at high
speed.
5. Align the IR ports of the two watches with
each other.
Put the receiving watch into receive standby
at this time. See To receive a single image
for more information.
6. On the sending watch, press F to send
the displayed image.
The data send screen shown nearby
appears while an image send operation is in
progress.
The message OK appears momentarily after
the image send operation is complete. Next,
the watch returns to the image selection
screen in step 4 of the above procedure.
After you are finished sending images, press D to return to the
Timekeeping Mode.
Note
Pressing A during the above procedure displays the COM menu.
Pressing D during the above procedure returns to the Timekeeping Mode.
To receive a single image
1. On the COM menu, press E to move the
pointer to OTHERS.
2. Press F to display the OTHERS menu,
with the pointer located next to SEND.
3. Press E to move the pointer to RECEIVE.
4. Press F again to enter receive standby,
which is indicated by the screen nearby.
5. Align the IR ports of the two watches with
each other, and perform the send operation
on the sending watch.
See To send a single image for more
information.
The message OK appears momentarily,
followed by the received image. Next, the
watch returns to the receive standby screen
in step 3 of the above procedure.
After you are finished receiving images, press D to return to the
Timekeeping Mode.
Note
Pressing A during the above procedure displays the COM menu.
Pressing D during the above procedure returns to the Timekeeping Mode.
COM
PC
OTHERS
OTHERS
SEND
RECEIVE
OTHERS
RECEIVE
Pointer
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio 2220 - WristCamera at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio 2220 - WristCamera in the language / languages: English as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio 2220 - WristCamera

Casio 2220 - WristCamera User Manual - German - 11 pages

Casio 2220 - WristCamera User Manual - Spanish - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info