•After you perform an operation in any mode, pressing B returns to the Timekeeping Mode.
•Holding down C at any time illuminates the display.
•Frequent use of the backlight shortens the battery life.
•If you do not perform any operation for a few minutes in Alarm Mode and Time Setting Mode, the watch automatically reverts to the normal timekeeping screen.
•In the Timekeeping Mode, press A to switch between
the 12-hour and 24-hour formats.
•When using 12-hour format, a P appears on the display
for “pm” times (noon to 11:59 pm). An “am” time (mid-
night to 11:59 am) is indicated when there is no P indi-
cator on the display. 24-hour format is being used when
the 24 indicator is on the display.
•Day of the week is displayed as follows.
SU: SundayMO: Monday
TU: TuesdayWE: Wednesday
TH: ThursdayFR: Friday
SA: Saturday
ALARM MODE
When the Daily Alarm is switched on, the alarm sounds
for 20 seconds at the preset time each day. When the
Hourly Time Signal is switched on, the watch beeps ev-
ery hour on the hour.
To set the alarm time
1.Press C while in the Alarm Mode. The hour digits flash
because they are
selected
.
At this time the Daily Alarm is switched on automatically.
2.Press C to change the selection in the following se-
quence.
MinutesHour
Normal Alarm Mode
(No digit flashes)
3.Press A to increase the selected digits. Holding down A changes the number at
high speed.
•The format (12-hour and 24-hour) of the alarm time matches the format you select
for normal timekeeping.
•When setting the alarm time using the 12-hour format, take care to set the time
correctly as morning or afternoon (PM).
4.After you set the alarm time, use C to return to the Alarm Mode.
To stop the alarm
Press C to stop the alarm after it starts to sound.
To switch the Daily Alarm and Hourly Time Signal on and off
Press A while in the Alarm Mode to change the status of the Daily Alarm and Hourly
Time Signal in the following sequence.
[Alarm on Indicator/Hourly Time Signal on Indicator]
Both ONBoth OFFDaily Alarm
only
Hourly Time
Signal only
To test the alarm
Hold down A while in the Alarm Mode to sound the alarm.
Hour
Seconds
Day
Day of week
PM indicator
Minutes
Hour
Alarm on indicator
Hourly time signal
on indicator
Mode indicator
Minutes
STOPWATCH MODE
The Stopwatch Mode lets you measure elapsed time, split
times, and two finishes. The range of the stopwatch is 59
minutes, 59.99 seconds.
Start
StopRe-startStopClear
Start
SplitSplit releaseStopClear
Start
SplitStopSplit releaseClear
First runner
finishes.
Second runner
finishes.
Record time of
first runner.
Record time of
second runner.
(a) Elapsed time measurement
(b) Split time measurement
(c) Split time and 1st-2nd place times
TIME SETTING MODE
To set the time and date
1.Use B to enter the Time Setting Mode.
•The seconds digits flash because they are
selected.
2.Press C to change the selection in the following se-
quence.
Minutes
Month
SecondsHour
Day of weekDay
3.While the seconds digits are selected (flashing), press A to reset the seconds to
“00”. If you press A while the seconds count is in the range of 30 to 59, the sec-
onds are reset to “00” and 1 is added to the minutes. If the seconds count is in the
range of 00 to 29, the minutes count is unchanged.
4.While any other digits (besides seconds) are selected (flashing), press A to in-
crease the number. While the day of the week is selected, pressing A advances
to the next day. Holding down A changes the current selection at high speed.
5.After you set the time and date, press B to return to the Timekeeping Mode.
•If you do not operate any button for a few minutes while a selection is flashing, the
flashing stops and the watch goes back to the Timekeeping Mode automatically.
Mode indicator
1/100 second
Minutes
Seconds
Split time indicator
Hour
Seconds
Day
Day of week
PM indicator
Minutes
Need help? Post your question in this forum.
Report abuse
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Casio 2117 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Casio 2117 in the language / languages: English as an attachment in your email.
The manual is 0,07 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.