•Press B to change from mode to mode. Each mode is explained in detail on the following pages.
•After you perform an operation in any mode, pressing B returns to the Timekeeping Mode.
•Holding down A at any time illuminates the display.
•The backlight of this watch employs an electroluminescent (EL) light, which loses its illuminating power after very long term use.
•Frequent use of the backlight shortens the battery life.
Timekeeping ModeTime Setting Mode
PM
Alarm Mode
▲
A
B
C
Stopwatch Mode
PM
▲
▲
▲
TIMEKEEPING MODE
•In the Timekeeping Mode, press C to switch
between the 12-hour and 24-hour formats.
•Day of the week is displayed as follows.
SU:SundayMO:MondayTU:Tuesday
WE:WednesdayTH:ThursdayFR:Friday
SA:Saturday
PM
A
B
C
Date
Day of the week
PM indicator
Hour
Minute
Second
ALARM MODE
To set the alarm time
1.Hold down A while in the Alarm Mode until the hour
digits start to flash on the display. The hour digits
flash because they are
selected
.
2.
Press
A
to change the selection in the following sequence.
When the Daily Alarm is switched on, the alarm sounds
for 20 seconds at the preset time each day. When the
Hourly Time Signal is switched on, the watch beeps
every hour on the hour.
HourMinutes
Normal Alarm Mode
(No digit flashes)
•Once you reach the normal Alarm Mode, you have to hold down A again until the hour
digits start to flash.
3.Press
C
to increase the selected digits. Holding down
C
changes the number at high speed.
•The format (12-hour and 24-hour) of the alarm time matches the format you select for
normal timekeeping.
•When setting the alarm time using the 12-hour format, take care to set the time correctly
as morning or afternoon (PM).
4.After you set the alarm time, press A to return to the Alarm Mode. At this time the Daily
Alarm is switched on automatically.
Hourly time signal on indicator
C
A
B
Alarm on
indicator
Hour
Minutes
Mode indicator
To stop the alarm
Press A to stop the alarm after it starts to sound.
To switch the Daily Alarm and Hourly Time Signal on and off
Press C while in the Alarm Mode to change the status of the Daily Alarm and Hourly Time
Signal in the following sequence.
[Alarm on Indicator/Hourly Time Signal on Indicator]
Hourly Time
Signal only
Daily Alarm
only
Both offBoth on
To test the alarm
Hold down C while in the Alarm Mode to sound the alarm.
STOPWATCH MODE
The Stopwatch Mode lets you measure elapsed time,
split times, and two finishes. The range of the stop-
watch is 59 minutes, 59.99 seconds.
Mode Indicator
SPLIT
A
B
C
Seconds
Minutes
1/100 second
Split time indicator
(a) Elapsed time measurement
CCCCA
(b) Split time measurement
CAACA
(c) Split time and 1st-2nd place times
CACAA
Start
Start
Start
Split
Split
StopRe-start
Split release
Stop
Stop
Stop
Clear
Clear
Split release
Clear
Second runner finishes.
Record time of first runner.
First runner
finishes.
Record time of
second runner.
TIME SETTING MODE
To set the time and date
1.Use B to enter the Time Setting Mode.
•The seconds digits flash because they are
selected.
2.Press A to change the selection in the following
sequence.
PM
A
B
C
PM indicator
Date
Minutes
Hour
Seconds
Day of the week
Hour
MinutesSeconds
Day of
Week
Date
Month
3.While the seconds digits are selected (flashing), press C to reset the seconds to “00”. If
you press C while the seconds count is in the range of 30 to 59, the seconds are reset to
“00” and 1 is added to the minutes. If the seconds count is in the range of 00 to 29, the
minutes count is unchanged.
4.While any other digits (besides seconds) are selected (flashing), press C to increase the
number. While the day of the week is selected, pressing C advances to the next day.
Holding down C changes the current selection at high speed.
5.After you set the time and date, press B to return to the Timekeeping Mode.
•If you do not operate any button for a few minutes while a selection is flashing, the
flashing stops and the watch goes back to the Timekeeping Mode automatically.
Need help? Post your question in this forum.
Report abuse
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Casio 1434 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Casio 1434 in the language / languages: English as an attachment in your email.
The manual is 0,05 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.