722416

Carson Reflex Pro 3 Nano-Gyro 2.4G Manual

2
Zoom out
Zoom in
Previous page
1/2
Next page
GB // Service-Hotline for Germany: 03675 7333 343 // www.carson-modelsport.de
Receiver Reex Pro 3 Nano + Gyro 2.4G
500501539 // Revision: May 2017
SETTING REV/NOR
SPECIFICATIONS
MOUNTING THE RECEIVER
SETTING FAIL SAFE
Channels: 4
Frequency: 2.4 GHz
Input voltage: 6V
Dimensions: 34x14x18mm
The Reflex PRO 3 Nano receiver with integrated gyro has 3 channels and an AUX output.
In addition to its normal functions, this receiver has an intelligent vehicle controller, which ensures that the vehicle always keeps to the
desired direct of travel on bends or uneven surfaces.
Use the double-sided adhesive tape included in the delivery to
secure the receiver.
Secure it to a clean and horizontal surface.
Please take note of the correct mounting position!
Works only on channel 2!
1. Switch off the receiver
2. Connect the "binding cable" to the receiver using the " FAIL
SAFE PINs" . connection, see figure.
3. Switch on the receiver (LED flashes)
4. Bring the remote control into the desired " FAIL-SAVE" posi-
tion and switch on.
5. Hold the position until the LED is lit permanently.
6. Switch off the receiver and remove the "binding cable".
1. Switch off the receiver
2. Connect the “binding
cable”to the receiver using
the "PAIR PINs" connection,
see figure.
3. Switch on the receiver (LED
flashes)
4. Switch on the remote
control (LED flashes
permanently - binding
completed).
5. Switch off the receiver
and remove the "binding
cable” again.
GENERAL
BINDING THE RECEIVER
SETTING THE SENSITIVITY
Mounting position
Adhesive
tape
"GAIN button" Adjustment of
steering correction
How strongly the receiver
shall correct when steering is
adjusted here.
1. Alteration of the setting – Choice of 8 levels:
- Level 1: highest sensitivity
- Level 7: lowest sensitivity
- Level 8: without control
2. The red LED on the receiver indicates the present level by
the number of flashes (1-8) .
Should the gyro function be
active in the wrong direction,
you can alter this situation with
the REV/NOR button.
• Switch on the receiver and then press and hold the REV/NOR
button for 3-4 seconds
• The LED on the receiver flashes 2x to indicate that the direc-
tion has been altered
Declaration of conformity
Hereby, Tamiya-Carson GmbH & Co. KG declares that the radio equipment type
is in compliance with the directive 2014/53/EU. The full text of the EU declaration
of conformity is available at the following internet address.
http://www.carson-modelsport.com/de/produkte.htm
Meaning of the symbol on the product, packaging or instructions
for use: Electrical appliances contain valuable recyclable materials
and should not be discarded in the domestic waste at the end of
their life!
Help us protect the environment and conserve resources
by taking this appliance along to the appropriate local recycling
centre. Your local waste management organisation or specialist
dealer will be able to answer any queries you may have.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Carson Reflex Pro 3 Nano-Gyro 2.4G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Carson Reflex Pro 3 Nano-Gyro 2.4G in the language / languages: English, German as an attachment in your email.

The manual is 0,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info