Manual Carmen EB2000 (page 17 of 20) (English, German, Dutch, French)

570131

Zoom out

Zoom in

1/20

17•English

› Use in accordance with purpose

The appliance is only intended for (pre)heating your bed. Use only

as an underblanket and do not use above the occupant of the bed.

No liability is accepted for any damage resulting from use for other

purposes, faulty operation or amateur repairs. Guarantee services

arealsoexcludedinsuchcases.

The appliance is not intended for medical use in hospitals!

› Operating instructions model EB0500

Switchcontrol(A)

1. Heat levels 3 and 4

2. Heat levels 1 and 2

3. Braille markings

4.Oposition

How to use switch

1. Ensure the blanket is tted to the bed correctly.

2.Plugthepowerleadintotheclosestsocket,usinganextension

lead if needed to ensure that the lead is not stretched.

Preheating the bed

Move the heat setting on the control switch to heat level 3 or 4,

dependingontheleveloftheheatrequired.Allowapproxima-

tely 60-90 minutes for the blanket to heat the bed thoroughly,

although this time may vary depending on the room temperature

and type of bedding used.

All night use

Move the heat setting on the control switch to heat level 1 or 2.

• Thesesettingswillprovidesafeandcomfortableheattosleep

on all night.

• Thesesettingscanalsobeusedtoairthebed.

Warning!

Always ensure that the heat setting is moved to the OFF position

whenyougetupthenextday,orafterairingthebed.

Braille markings

• Braillemarkingsarelocatedonthebackoftheswitchtohelp

identify the direction of the heat level in the dark, or if visually

impaired.

• Thehighestheatlevel‘preheat’isidentiedby3raisednodu-

les,‘midlevel’by2raisednodulesand‘lowlevel’(allnight)by

1 raised nodule Fitting underblanket.

Fitting instructions

1. Place the blanket directly on the mattress, with the control

switch end at the head of the bed (D).

2. The blanket must be positioned to the mattress in the following

manner. Place the blanket directly on the mattress and ensure

that a space of 10-15cm (4-6 inches) is left between the bottom

edge of the blanket and mattress.

3. Position the blanket on the bed ensuring the pillow area is clear.

› Operating instructions model EB1000

Switchcontrol(B)

1. Illuminated heat setting light

2. Heat levels 3 and 4

3. Heat level 1 and 2

4. Braille markings

5.Oposition

How to use switch

1. Ensure the blanket is tted to the bed correctly.

2.Plugthepowerleadintotheclosestsocket,usinganextension

lead if needed to ensure that the lead is not stretched.

Preheating the bed

Move the heat setting on the control switch to heat level 3 or 4,

dependingontheleveloftheheatrequired.Allowapproxima-

tely 60-90 minutes for the blanket to heat the bed thoroughly,

although this time may vary depending on the room

temperature and type of bedding used.

All night use

Move the heat setting on the control switch to heat level 1 or 2.

• Thesesettingswillprovidesafeandcomfortableheattosleep

on all night.

• Thesesettingscanalsobeusedtoairthebed.

Warning!

Always ensure that the heat setting is moved to the OFF position

whenyougetupthenextday,orafterairingthebed.

Braille markings

• Braillemarkingsarelocatedonthebackoftheswitchtohelp

identify the direction of the heat level in the dark, or if visually

impaired.

• Thehighestheatlevel‘preheat’isidentiedby3raisednodu-

les,‘midlevel’by2raisednodulesand‘lowlevel’(allnight)by

1 raised nodule Fitting underblanket.

Blankets_Manual A5.indd 17 10-10-2011 10:42:08

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Carmen EB2000 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,59 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Carmen EB2000 Manual

Product: