570128
17
Zoom out
Zoom in
Previous page
1/20
Next page
17•English
Use in accordance with purpose
The appliance is only intended for (pre)heating your bed. Use only
as an underblanket and do not use above the occupant of the bed.
No liability is accepted for any damage resulting from use for other
purposes, faulty operation or amateur repairs. Guarantee services
arealsoexcludedinsuchcases.
The appliance is not intended for medical use in hospitals!
Operating instructions model EB0500
Switchcontrol(A)
1. Heat levels 3 and 4
2. Heat levels 1 and 2
3. Braille markings
4.Oposition
How to use switch
1. Ensure the blanket is tted to the bed correctly.
2.Plugthepowerleadintotheclosestsocket,usinganextension
lead if needed to ensure that the lead is not stretched.
Preheating the bed
Move the heat setting on the control switch to heat level 3 or 4,
dependingontheleveloftheheatrequired.Allowapproxima-
tely 60-90 minutes for the blanket to heat the bed thoroughly,
although this time may vary depending on the room temperature
and type of bedding used.
All night use
Move the heat setting on the control switch to heat level 1 or 2.
• Thesesettingswillprovidesafeandcomfortableheattosleep
on all night.
• Thesesettingscanalsobeusedtoairthebed.
Warning!
Always ensure that the heat setting is moved to the OFF position
whenyougetupthenextday,orafterairingthebed.
Braille markings
• Braillemarkingsarelocatedonthebackoftheswitchtohelp
identify the direction of the heat level in the dark, or if visually
impaired.
• Thehighestheatlevel‘preheat’isidentiedby3raisednodu-
les,midlevel’by2raisednodulesandlowlevel’(allnight)by
1 raised nodule Fitting underblanket.
Fitting instructions
1. Place the blanket directly on the mattress, with the control
switch end at the head of the bed (D).
2. The blanket must be positioned to the mattress in the following
manner. Place the blanket directly on the mattress and ensure
that a space of 10-15cm (4-6 inches) is left between the bottom
edge of the blanket and mattress.
3. Position the blanket on the bed ensuring the pillow area is clear.
Operating instructions model EB1000
Switchcontrol(B)
1. Illuminated heat setting light
2. Heat levels 3 and 4
3. Heat level 1 and 2
4. Braille markings
5.Oposition
How to use switch
1. Ensure the blanket is tted to the bed correctly.
2.Plugthepowerleadintotheclosestsocket,usinganextension
lead if needed to ensure that the lead is not stretched.
Preheating the bed
Move the heat setting on the control switch to heat level 3 or 4,
dependingontheleveloftheheatrequired.Allowapproxima-
tely 60-90 minutes for the blanket to heat the bed thoroughly,
although this time may vary depending on the room
temperature and type of bedding used.
All night use
Move the heat setting on the control switch to heat level 1 or 2.
• Thesesettingswillprovidesafeandcomfortableheattosleep
on all night.
• Thesesettingscanalsobeusedtoairthebed.
Warning!
Always ensure that the heat setting is moved to the OFF position
whenyougetupthenextday,orafterairingthebed.
Braille markings
• Braillemarkingsarelocatedonthebackoftheswitchtohelp
identify the direction of the heat level in the dark, or if visually
impaired.
• Thehighestheatlevel‘preheat’isidentiedby3raisednodu-
les,midlevel’by2raisednodulesandlowlevel’(allnight)by
1 raised nodule Fitting underblanket.
Blankets_Manual A5.indd 17 10-10-2011 10:42:08
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Carmen EB1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Carmen EB1000 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info