Manual Carmen CR1090 - THERMOCERAMIC SLIMLINE (page 21 of 24) (English, German, Dutch, French)

570144

Zoom out

Zoom in

1/24

21 • English

A guideline to determine what temperature setting is best for your hair:

This guideline indicates the optimum temperature setting.

Variable temperature adjustment

You can set the temperature with the variable temperature adjustment:

I section : from 60 to 100 degrees

II section : from 100 to 150 degrees

III section : from 150 to 200 degrees

› Operating instructions

1. After washing your hair, it’s really important to prepare it for styling. If you use lots of

heated styling tools on your hair use a heat protection spray before you begin styling.

2. Divide your hair into sections, and comb each section through. Use sectioning clips to

clip hair out of the way so you can straighten hair thoroughly.

3. Insert the plug in the socket. Turn the on/off switch to ‘on’ before use.

4. Adjust the temperature regulator to the desired temperature.

5. Place the straightener on a heat resistant surface while they are warming up and during

straightening.

6. The straightener will have reached the set temperature after 60 seconds.

7. Clamp a section of the hair between the straightening plates, as close to the roots

as possible. Gently slide the straightener down your hair shaft to the ends. For more

difﬁcult sections of hair, you may need to do this again. Repeat on all sections of the

hair.

8. Turn the on/off switch to ‘off’ to deactivate the device. Remove the plug from the

socket after use. Hang the straightener on the practical storage ring once it has cooled

down.

16 • English 17 • English

• The mains lead of the appliance must not be replaced. An appliance with a faulty or

damaged mains lead can not be repaired and must be disposed of as waste material.

Have a service provider authorised by the manufacturer inspect the product

to minimise risks.

• Use the appliance for its intended purpose only.

• Chemical waste: a defective appliance should be rendered unusable. Consult your local

authorities for information about waste disposal regulations.

ThermoCeramic technology

The ceramic coated plates ensure that the hair cuticle lies at once styled. This ensures

that your hair reects light and therefore appears healthy and shiny. The ceramic coating

also acts as a barrier to protect your hair from the high temperature reached by the

element. This minimises damage to the cuticle.

Selecting the correct heat setting

The ThermoCeramic Slimline is designed to reach very high temperatures for use on all

hair types. Most hair types can be styled perfectly without using the highest heat settings.

Where possible, you should always use the lower settings as this is safer and kinder to

your hair.

A guideline to determine what temperature setting is best for your hair:

200°

190°

180°

170°

160°

150°

140°

130°

120°

One straightener for all hair types

From fragile, thin hair to thick curly hair

Hair Types

Fragile:

very thin hair

Thin:

easily styled hair

Normal:

normal texture hair

Curly:

curly hair

Full:

thick to very thick hair

This guideline indicates the optimum temperature setting.

Variable temperature adjustment

You can set the temperature with the variable temperature adjustment:

I section : from 60 to 100 degrees

II section : from 100 to 150 degrees

III section : from 150 to 200 degrees

Operating›instructions››

1. After washing your hair, it’s really important to prepare it for styling. If you use lots of

heated styling tools on your hair use

a heat protection spray before you begin styling.

2. Divide your hair into sections, and comb each section through. Use sectioning clips to

clip hair out of the way so you can straighten hair thoroughly.

3. Insert the plug in the socket. Turn the on/off switch to ‘on’ before use.

4. Adjust the temperature regulator to the desired temperature.

5. Place the straightener on a heat resistant surface while they

are warming up and during straightening.

6. The straightener will have reached the set temperature after 30 seconds.

7. Clamp a section of the hair between the straightening plates, as close to the roots

as possible. Gently slide the straightener down your hair shaft to the ends. For more

difcult sections of hair, you may need to do this again. Repeat on all sections of

the hair.

8. Turn the on/off switch to ‘off’ to deactivate the device. Remove the plug from the

socket after use. Hang the straightener on the practical storage ring once it has

cooled down.

Cleaning›and›maintenance››

Over time, you will nd a natural build up on your straightening plates. This can be caused

by natural oils in your hair and styling products and lotions. At the rst sign of build up,

you should clean your straightening plates. To do this, always switch your straightener

off and wait for them to cool down. Wipe with a damp cloth, or a non abrasive cleaning

wipe. Failure to do this may mean the build up becomes burnt onto the straightening

plates and they will become difcult to clean. If your straightening plates do become

discoloured it will NOT affect their performance.

Disconnect the plug of the appliance from the socket outlet. Never submerge the appli-

ance in water. Do not allow dirt or hair products to build up on the appliance. Always

wait for the appliance to cool down thoroughly before cleaning.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Carmen CR1090 - THERMOCERAMIC SLIMLINE in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Carmen CR1090 - THERMOCERAMIC SLIMLINE Manual

Product: