777921
46
Zoom out
Zoom in
Previous page
1/48
Next page
46
Tighten the rear roller only enough to prevent slippage at the front roller. Turn both the right and left bolt
clockwise reasonably and inspect for proper tension. When an adjustment is made to the belt tension,
you must also make a tracking adjustment to compensate for the change in belt tension.
Note: DO NOT OVERTIGHTEN - Over tightening will cause belt damage and premature
bearing failure.
Belt tracking adjustment:
This treadmill is designed to keep the belt reasonably centered while in use. It is normal for some belts to
drift near one side while the belt is running with no one on it. After a few minutes of use, the belt should
have a tendency to center itself. If during use, the belt continues to move toward one side, adjustments
are necessary.
The procedures are as below:
1. First set speed at lowest position.
2. Second check the belt shifts to which side.
If the belt shifts to right, tighten the right bolt and loosen
the left bolt by using Hexagonal Wrench, until
the belt is centered itself; If belt shifts to left, tighten the
left bolt and loosen the right bolt by using 6mm
Hexagonal Wrench, until the belt is centered. When
adjusting the belt using the Hexagonal Wrenches, it
is important to adjust the belt in half turn increments. Over
adjusting the belt can cause damage to the
mat.
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Capital Sports 10031998 Pacemaker X60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Capital Sports 10031998 Pacemaker X60 in the language / languages: English, German as an attachment in your email.

The manual is 3.52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info