494464

Canon TC-80N3 Manual

1
Zoom out
Zoom in
Previous page
1/2
Next page
1 2 3
Overview
The TC-80N3 Timer/Remote Controller is a programmable
electronic shutter release. When you connect it to your EOS SLR
or DSLR it will allow you to control:
1. when the shutter opens (self-timer mode)
2. how frequently the shutter opens (interval
timer mode)
3. how long the shutter stays open (long-exposure timer
mode)
4. how many exposures the camera will make in total
(exposure count mode)
You can also combine modes: For example, you can program
the controller to wait ve minutes, release the shutter, then take
a total of 25 exposures at ve minute intervals. Refer to the
Combinations Chart for more details.
The TC-80N3 also includes a remote switch that provides the
same functions as your camera’s shutter button (auto-focus, auto-
exposure, and shutter release). When used simply as a remote
release (no timer functions), the TC-80N3 does not require battery
power.
Compatible Cameras
• EOS 1v, 1v-HS, and EOS 3 lm cameras
• All versions of EOS-1D and EOS-1Ds
• EOS D30 and D60
• EOS 10D, 20D, 30D, 40D, 50D, 7D
• EOS 5D and 5D Mark II
Controls and Functions
continuous loop. When the
time unit you wish to set is
blinking, turn the Jog Dial to
the amount you want.
3. After setting a time unit,
press the Jog Dial once to
register it. Time amounts
can be set in single digit
increments, up to:
Seconds: 59 Minutes: 59 Hours: 99
4. Repeat Step 3 for any additional time units you wish to set.
Once a time unit has been registered it will no longer blink.
Self-timer Mode
1. Use the Jog Dial to set
the desired delay time.
2. Press the Start/Stop
button to start the self-timer.
The Self-timer icon will start
blinking and the time display will count down. The shutter will
release when the timer reaches zero (0). To pause the self-timer
before the shutter releases, press the Start/Stop button. Press it
again to resume.
• Do not use the TC-80N3 in combination with your
camera’s self-timer. Doing so may interfere with the TC-
80N3's timer function.
• You can combine the self-timer with the Long Exposure
Mode for Bulb exposures. Setting your camera to Bulb will
result in a Bulb exposure only if you have set the the TC-
80N3 to Long Exposure Mode.
• If you combine the Long Exposure Mode and Interval
Timer Mode, both will begin only after the Self-timer delay
has elapsed.
Interval Timer Mode
1. Use the Jog Dial to set the
desired time interval.
2. Press the Start/Stop
button. The camera will
immediately take the rst
exposure. Note: If you want to program a sequence of exposures
at a given interval you must set the exposure count to an amount
greater than one. Subsequent exposures will be at the interval
you have set.
QuickGuide to
Canon TC-80N3
Timer/Remote Controller
Display Panel
Jog Dial
Release Button
Start/Stop
Button
Mode
Button
Display
Illuminator
Button
Battery
Compartment
Plug
Connecting/Disconnecting the TC-80N3
1. Remove your camera’s remote control socket cover and
place it in the holder provided on the back of the TC-80N3.
2. Insert the TC-80N3’s plug into your camera’s remote control
socket by pressing the round black base of the plug. (Note:
Touching the silver collar will prevent the plug from locking.)
To remove the plug, grasp the silver collar and pull outward.
Setting a Time Amount
1. Press the Mode Button to select one of the three timing
modes (self-timer, interval, or long exposure).
2. Press the Jog Dial to select the time unit you wish to set.
Each time you press the dial, the time units will blink in
the following order: Seconds → Minutes → Hours, in a
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon TC-80N3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon TC-80N3 in the language / languages: English as an attachment in your email.

The manual is 0,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info