615745
33
Zoom out
Zoom in
Previous page
1/37
Next page
33
Error Messages
Unable to complete WPS.
The access point’s encryption method is set to [WEP]. Wi-Fi Protected Setup
(WPS) cannot connect to access points set to this encryption method.
X Change the access point’s encryption method or use another connection method (A 7).
Unable to complete WPS. Try the operation again.
More than 2 minutes passed between activating WPS on the access point and
selecting [OK] on the camera.
X Start over the WPS procedure from the beginning.
The WPS button was not held down long enough.
X Refer to the instruction manual of your wireless router. When using WPS to make a
wireless connection, keep the WPS button held down until the wireless router’s WPS
function is activated.
Unable to connect
Could not connect to the access point or network device selected.
Cordless phones, microwave ovens, refrigerators and other appliances may
interfere with the wireless signal.
X Try using the camera in a location farther away from such appliances.
Unable to obtain an IP address
X If you are not using a DHCP server, connect using the [Manual] option and enter the IP
address using the [Manual] option (A 15).
X Turn on the DHCP server. If it is already on, make sure it is functioning properly.
X Make sure the address range for the DHCP server is sufficient.
WFT Error Check the Wi-Fi settings.
Some of the network settings saved in the camera are not compatible with the
transmitter attached.
X Change the network settings or reset all the camera’s settings to use the default network
settings.
Wi-Fi authentication unsuccessful
X Check the access point’s authentication/encryption method and encryption key and
change the camera’s network settings (A 5) as necessary.
Wi-Fi error. Incorrect authentication method.
X Check the access point’s authentication/encryption method and change the camera’s
network settings (A 5) as necessary.
Wi-Fi error. Incorrect encryption key.
When the authentication mode was set to [WPA-PSK] or [WPA2-PSK], or the
encryption method was set to [WEP], the encryption key (WEP index) entered or
its length (number of characters) is incorrect.
X When entering ASCII characters, enter 5 characters (64-bit encoding) or 13 characters
(128-bit encoding). When entering hexadecimal characters, enter 10 characters (64-bit
encoding) or 26 characters (128-bit encoding).
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon EOS C300 Mark II PL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon EOS C300 Mark II PL in the language / languages: English as an attachment in your email.

The manual is 2,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon EOS C300 Mark II PL

Canon EOS C300 Mark II PL Quick start guide - English - 42 pages

Canon EOS C300 Mark II PL User Manual - English - 223 pages

Canon EOS C300 Mark II PL Quick start guide - German, French, Italian, Spanish - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info